Messages in this thread Patch in this message | | | From | Jacopo Mondi <> | Subject | [PATCH 2/8] dt-bindings: display: bridge: thc63lvd1024: Add lvds map property | Date | Thu, 19 Apr 2018 11:31:03 +0200 |
| |
The THC63LVD1024 LVDS to RGB bridge supports two different input mapping modes, selectable by means of an external pin.
Describe the LVDS mode map through a newly defined mandatory property in device tree bindings.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> --- .../devicetree/bindings/display/bridge/thine,thc63lvd1024.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt index 37f0c04..0937595 100644 --- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt @@ -12,6 +12,8 @@ Required properties: - compatible: Shall be "thine,thc63lvd1024" - vcc-supply: Power supply for TTL output, TTL CLOCKOUT signal, LVDS input, PPL and digital circuitry +- thine,map: LVDS mapping mode selection signal, pin name "MAP". Shall be <1> + for mapping mode 1, <0> for mapping mode 2 Optional properties: - powerdown-gpios: Power down GPIO signal, pin name "/PDWN". Active low @@ -36,6 +38,7 @@ Example: vcc-supply = <®_lvds_vcc>; powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + thine,map = <1>; ports { #address-cells = <1>; -- 2.7.4
| |