Messages in this thread Patch in this message | | | From | Fabrice Gasnier <> | Subject | [PATCH 1/3] dt-bindings: iio: stm32-adc: add support for STM32MP1. | Date | Wed, 18 Apr 2018 17:37:52 +0200 |
| |
Document support for STM32MP1 ADC. It's quite similar to STM32H7 ADC. Introduce "st,stm32mp1-adc" compatible to handle variants of this hardware such as vregready flag, interrupts, clock rate.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> --- Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt index e8bb824..9994384 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt @@ -24,8 +24,11 @@ Required properties: - compatible: Should be one of: "st,stm32f4-adc-core" "st,stm32h7-adc-core" + "st,stm32mp1-adc-core" - reg: Offset and length of the ADC block register set. -- interrupts: Must contain the interrupt for ADC block. +- interrupts: One or more interrupts for ADC block. Some parts like stm32f4 + and stm32h7 share a common ADC interrupt line. stm32mp1 has separate + lines for each ADC within ADC block. - clocks: Core can use up to two clocks, depending on part used: - "adc" clock: for the analog circuitry, common to all ADCs. It's required on stm32f4. @@ -53,6 +56,7 @@ Required properties: - compatible: Should be one of: "st,stm32f4-adc" "st,stm32h7-adc" + "st,stm32mp1-adc" - reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200). - clocks: Input clock private to this ADC instance. It's required only on stm32f4, that has per instance clock input for registers access. -- 1.9.1
| |