lkml.org 
[lkml]   [2018]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] tpm: reduce polling time to usecs for even finer granularity
Date
The TPM burstcount and status commands are supposed to return very
quickly [1][2]. This patch further reduces the TPM poll sleep time to usecs
in get_burstcount() and wait_for_tpm_stat() by calling usleep_range()
directly.

After this change, performance on a TPM 1.2 with an 8 byte burstcount for
1000 extends improved from ~10.7 sec to ~7 sec.

[1] From TCG Specification "TCG PC Client Specific TPM Interface
Specification (TIS), Family 1.2":

"NOTE : It takes roughly 330 ns per byte transfer on LPC. 256 bytes would
take 84 us, which is a long time to stall the CPU. Chipsets may not be
designed to post this much data to LPC; therefore, the CPU itself is
stalled for much of this time. Sending 1 kB would take 350 μs. Therefore,
even if the TPM_STS_x.burstCount field is a high value, software SHOULD
be interruptible during this period."

[2] From TCG Specification 2.0, "TCG PC Client Platform TPM Profile
(PTP) Specification":

"It takes roughly 330 ns per byte transfer on LPC. 256 bytes would take
84 us. Chipsets may not be designed to post this much data to LPC;
therefore, the CPU itself is stalled for much of this time. Sending 1 kB
would take 350 us. Therefore, even if the TPM_STS_x.burstCount field is a
high value, software should be interruptible during this period. For SPI,
assuming 20MHz clock and 64-byte transfers, it would take about 120 usec
to move 256B of data. Sending 1kB would take about 500 usec. If the
transactions are done using 4 bytes at a time, then it would take about
1 msec. to transfer 1kB of data."

Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
---
drivers/char/tpm/tpm.h | 4 +++-
drivers/char/tpm/tpm_tis_core.c | 5 +++--
2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 7e797377e1eb..f0e4d290c347 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -54,7 +54,9 @@ enum tpm_timeout {
TPM_TIMEOUT = 5, /* msecs */
TPM_TIMEOUT_RETRY = 100, /* msecs */
TPM_TIMEOUT_RANGE_US = 300, /* usecs */
- TPM_TIMEOUT_POLL = 1 /* msecs */
+ TPM_TIMEOUT_POLL = 1, /* msecs */
+ TPM_TIMEOUT_USECS_MIN = 100, /* usecs */
+ TPM_TIMEOUT_USECS_MAX = 500 /* usecs */
};

/* TPM addresses */
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 021e6b68f2db..5bba5c662423 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -84,7 +84,8 @@ static int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask,
}
} else {
do {
- tpm_msleep(TPM_TIMEOUT_POLL);
+ usleep_range(TPM_TIMEOUT_USECS_MIN,
+ TPM_TIMEOUT_USECS_MAX);
status = chip->ops->status(chip);
if ((status & mask) == mask)
return 0;
@@ -226,7 +227,7 @@ static int get_burstcount(struct tpm_chip *chip)
burstcnt = (value >> 8) & 0xFFFF;
if (burstcnt)
return burstcnt;
- tpm_msleep(TPM_TIMEOUT_POLL);
+ usleep_range(TPM_TIMEOUT_USECS_MIN, TPM_TIMEOUT_USECS_MAX);
} while (time_before(jiffies, stop));
return -EBUSY;
}
--
2.13.3
\
 
 \ /
  Last update: 2018-04-17 15:14    [W:0.061 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site