lkml.org 
[lkml]   [2018]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 3/3] net: phy: Enable C45 PHYs with vendor specific address space
Date
A search of the dev-addr property is done in of_mdiobus_register.
If the property is found in the PHY node, of_mdiobus_register_vend_spec_phy()
is called. This is a wrapper function for of_mdiobus_register_phy()
which finds the device in package based on dev-addr, and fills
devices_addrs, which is a new field added to phy_c45_device_ids.
This new field will store the dev-addr property on the same index
where the device in package has been found.

The of_mdiobus_register_phy() now contains an extra parameter,
which is struct phy_c45_device_ids *c45_ids.
If c45_ids is not NULL, get_vend_spec_addr_phy_device() is called
and c45_ids are propagated all the way to get_phy_c45_ids().

Having dev-addr stored in devices_addrs, in get_phy_c45_ids(),
when probing the identifiers, dev-addr can be extracted from
devices_addrs and probed if devices_addrs[current_identifier] is not 0.

Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@nxp.com>
---
drivers/net/phy/phy_device.c | 49 +++++++++++++++++--
drivers/of/of_mdio.c | 113 +++++++++++++++++++++++++++++++++++++++++--
include/linux/phy.h | 14 ++++++
3 files changed, 169 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index ac23322..5c79fd8 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -457,7 +457,7 @@ static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr,
static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
struct phy_c45_device_ids *c45_ids) {
int phy_reg;
- int i, reg_addr;
+ int i, reg_addr, dev_addr;
const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
u32 *devs = &c45_ids->devices_in_package;

@@ -493,13 +493,23 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
if (!(c45_ids->devices_in_package & (1 << i)))
continue;

- reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID1;
+ /* if c45_ids->devices_addrs for the current id is not 0,
+ * then dev-addr was defined in the PHY device tree node,
+ * and the PHY has been seen as a valid device, and added
+ * in the package. In this case we can use the
+ * dev-addr(c45_ids->devices_addrs[i]) to do the MDIO
+ * reading of the PHY ID.
+ */
+ dev_addr = !!c45_ids->devices_addrs[i] ?
+ c45_ids->devices_addrs[i] : i;
+
+ reg_addr = MII_ADDR_C45 | dev_addr << 16 | MII_PHYSID1;
phy_reg = mdiobus_read(bus, addr, reg_addr);
if (phy_reg < 0)
return -EIO;
c45_ids->device_ids[i] = (phy_reg & 0xffff) << 16;

- reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID2;
+ reg_addr = MII_ADDR_C45 | dev_addr << 16 | MII_PHYSID2;
phy_reg = mdiobus_read(bus, addr, reg_addr);
if (phy_reg < 0)
return -EIO;
@@ -551,6 +561,39 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
}

/**
+ * get_vend_spec_addr_phy_device - reads the specified PHY device
+ * and returns its @phy_device struct
+ * @bus: the target MII bus
+ * @addr: PHY address on the MII bus
+ * @is_c45: If true the PHY uses the 802.3 clause 45 protocol
+ * @c45_ids: Query the c45_ids to see if a PHY with a vendor specific
+ * register address space was defined in the PHY device tree
+ * node by adding the "dev-addr" property to the node.
+ * Store the c45 ID information about the rest of the PHYs
+ * found PHYs on the MDIO bus during probing.
+ *
+ * Description: Reads the ID registers of the PHY at @addr on the
+ * @bus, then allocates and returns the phy_device to represent it.
+ */
+struct phy_device *get_vend_spec_addr_phy_device(struct mii_bus *bus,
+ int addr, bool is_c45,
+ struct phy_c45_device_ids *c45_ids)
+{
+ u32 phy_id = 0;
+ int r;
+
+ r = get_phy_id(bus, addr, &phy_id, is_c45, c45_ids);
+ if (r)
+ return ERR_PTR(r);
+
+ /* If the phy_id is mostly Fs, there is no device there */
+ if ((phy_id & 0x1fffffff) == 0x1fffffff)
+ return ERR_PTR(-ENODEV);
+
+ return phy_device_create(bus, addr, phy_id, is_c45, c45_ids);
+}
+
+/**
* get_phy_device - reads the specified PHY device and returns its @phy_device
* struct
* @bus: the target MII bus
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 8c0c927..52e8bfb 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -45,7 +45,8 @@ static int of_get_phy_id(struct device_node *device, u32 *phy_id)
}

static int of_mdiobus_register_phy(struct mii_bus *mdio,
- struct device_node *child, u32 addr)
+ struct device_node *child, u32 addr,
+ struct phy_c45_device_ids *c45_ids)
{
struct phy_device *phy;
bool is_c45;
@@ -58,7 +59,12 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio,
if (!is_c45 && !of_get_phy_id(child, &phy_id))
phy = phy_device_create(mdio, addr, phy_id, 0, NULL);
else
- phy = get_phy_device(mdio, addr, is_c45);
+ if (c45_ids)
+ phy = get_vend_spec_addr_phy_device(mdio,
+ addr, is_c45,
+ c45_ids);
+ else
+ phy = get_phy_device(mdio, addr, is_c45);
if (IS_ERR(phy))
return PTR_ERR(phy);

@@ -190,6 +196,72 @@ static bool of_mdiobus_child_is_phy(struct device_node *child)
return false;
}

+static void of_fill_c45_devices_addrs(u32 dev_addr,
+ struct phy_c45_device_ids *c45_ids)
+{
+ int i;
+ const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
+
+ /* Search through all Device Identifiers
+ * and set dev_addr in c45_ids->devices_addrs,
+ * if the device bit is set in
+ * c45_ids->devices_in_package
+ */
+ for (i = 1; i < num_ids; i++) {
+ if (!(c45_ids->devices_in_package & (1 << i)))
+ continue;
+
+ c45_ids->devices_addrs[i] = dev_addr;
+ }
+}
+
+static int of_find_devaddr_in_pkg(struct mii_bus *bus, u32 addr, u32 dev_addr,
+ struct phy_c45_device_ids *c45_ids)
+{
+ u32 *devs = &c45_ids->devices_in_package;
+ int phy_reg, reg_addr;
+
+ reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS2;
+ phy_reg = mdiobus_read(bus, addr, reg_addr);
+ if (phy_reg < 0)
+ return -EIO;
+
+ *devs = (phy_reg & 0xffff) << 16;
+
+ reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS1;
+ phy_reg = mdiobus_read(bus, addr, reg_addr);
+ if (phy_reg < 0)
+ return -EIO;
+
+ *devs |= (phy_reg & 0xffff);
+
+ return 0;
+}
+
+/*
+ * Finds the device in package and populates the c45_ids
+ * if any device is found at dev_addr address. After this
+ * the PHY is registered
+ */
+static int of_mdiobus_register_vend_spec_phy(struct mii_bus *mdio,
+ struct device_node *child,
+ u32 addr, u32 dev_addr)
+{
+ struct phy_c45_device_ids c45_ids = {0};
+ int dev_err = 0;
+
+ if (!dev_addr)
+ goto register_phy;
+
+ dev_err = of_find_devaddr_in_pkg(mdio, addr, dev_addr, &c45_ids);
+
+ if (!dev_err)
+ of_fill_c45_devices_addrs(dev_addr, &c45_ids);
+
+register_phy:
+ return of_mdiobus_register_phy(mdio, child, addr, &c45_ids);
+}
+
/**
* of_mdiobus_register - Register mii_bus and create PHYs from the device tree
* @mdio: pointer to mii_bus structure
@@ -202,7 +274,10 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
{
struct device_node *child;
bool scanphys = false;
+ bool dev_addr_found = true;
int addr, rc;
+ int dev_addr = 0;
+ int ret;

/* Do not continue if the node is disabled */
if (!of_device_is_available(np))
@@ -226,6 +301,14 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)

/* Loop over the child nodes and register a phy_device for each phy */
for_each_available_child_of_node(np, child) {
+ /* Check if dev-addr is set in the PHY node */
+ ret = of_property_read_u32(child, "dev-addr", &dev_addr);
+
+ if (ret < 0) {
+ /* either not set or invalid */
+ dev_addr_found = false;
+ }
+
addr = of_mdio_parse_addr(&mdio->dev, child);
if (addr < 0) {
scanphys = true;
@@ -233,7 +316,14 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
}

if (of_mdiobus_child_is_phy(child))
- rc = of_mdiobus_register_phy(mdio, child, addr);
+ if (dev_addr_found)
+ rc = of_mdiobus_register_vend_spec_phy(mdio,
+ child,
+ addr,
+ dev_addr);
+ else
+ rc = of_mdiobus_register_phy(mdio, child,
+ addr, NULL);
else
rc = of_mdiobus_register_device(mdio, child, addr);

@@ -248,8 +338,16 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
if (!scanphys)
return 0;

+ /* reset device found variable */
+ dev_addr_found = true;
+
/* auto scan for PHYs with empty reg property */
for_each_available_child_of_node(np, child) {
+ /* Check if dev-addr is set in the PHY node,
+ * for PHYs which don't have reg property set
+ */
+ ret = of_property_read_u32(child, "dev-addr", &dev_addr);
+
/* Skip PHYs with reg property set */
if (of_find_property(child, "reg", NULL))
continue;
@@ -264,7 +362,14 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
child->name, addr);

if (of_mdiobus_child_is_phy(child)) {
- rc = of_mdiobus_register_phy(mdio, child, addr);
+ if (dev_addr_found)
+ rc = of_mdiobus_register_vend_spec_phy(mdio,
+ child,
+ addr,
+ dev_addr);
+ else
+ rc = of_mdiobus_register_phy(mdio, child,
+ addr, NULL);
if (rc && rc != -ENODEV)
goto unregister;
}
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 26aa320..889d85e 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -357,10 +357,13 @@ enum phy_state {
* struct phy_c45_device_ids - 802.3-c45 Device Identifiers
* @devices_in_package: Bit vector of devices present.
* @device_ids: The device identifer for each present device.
+ * @devices_addrs: The devices addresses from the device tree
+ * for each present device.
*/
struct phy_c45_device_ids {
u32 devices_in_package;
u32 device_ids[32];
+ u32 devices_addrs[32];
};

/* phy_device: An instance of a PHY
@@ -904,6 +907,9 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
struct phy_c45_device_ids *c45_ids);
#if IS_ENABLED(CONFIG_PHYLIB)
struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
+struct phy_device *get_vend_spec_addr_phy_device(struct mii_bus *bus, int addr,
+ bool is_c45,
+ struct phy_c45_device_ids *c45_ids);
int phy_device_register(struct phy_device *phy);
void phy_device_free(struct phy_device *phydev);
#else
@@ -913,6 +919,14 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
return NULL;
}

+static inline
+struct phy_device *get_vend_spec_addr_phy_device(struct mii_bus *bus, int addr,
+ bool is_c45,
+ struct phy_c45_device_ids *c45_ids)
+{
+ return NULL;
+}
+
static inline int phy_device_register(struct phy_device *phy)
{
return 0;
--
2.7.4
\
 
 \ /
  Last update: 2018-04-17 11:06    [W:0.162 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site