lkml.org 
[lkml]   [2018]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 1/3] net: phy: Add binding for vendor specific C45 MDIO address space
Date
The extra property enables the discovery on the MDIO bus
of the PHYs which have a vendor specific address space
for accessing the C45 MDIO registers.

Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@nxp.com>
---
Documentation/devicetree/bindings/net/phy.txt | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index d2169a5..82692e2 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -61,6 +61,11 @@ Optional Properties:
- reset-deassert-us: Delay after the reset was deasserted in microseconds.
If this property is missing the delay will be skipped.

+- dev-addr: If set, it indicates the device address of the PHY to be used
+ when accessing the C45 PHY registers over MDIO. It is used for vendor specific
+ register space addresses that do no conform to standard address for the MDIO
+ registers (e.g. MMD30)
+
Example:

ethernet-phy@0 {
@@ -72,4 +77,5 @@ ethernet-phy@0 {
reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
reset-assert-us = <1000>;
reset-deassert-us = <2000>;
+ dev-addr = <0x1e>;
};
--
2.7.4
\
 
 \ /
  Last update: 2018-04-17 11:06    [W:0.081 / U:0.348 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site