lkml.org 
[lkml]   [2018]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 14/14] arm64: dts: exynos: remove no longer needed samsung thermal properties
Date
Remove no longer needed samsung thermal properties.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
.../dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi | 20 --------------------
.../boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 19 -------------------
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 10 +++++-----
.../boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi | 21 ---------------------
arch/arm64/boot/dts/exynos/exynos7.dtsi | 2 +-
5 files changed, 6 insertions(+), 66 deletions(-)
delete mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
delete mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
delete mode 100644 arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
deleted file mode 100644
index f080357..0000000
--- a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos5433 TMU sensor configuration
- *
- * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <23>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <75>;
-samsung,tmu_min_efuse_value = <40>;
-samsung,tmu_max_efuse_value = <150>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_mux_addr = <6>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
deleted file mode 100644
index cccae66..0000000
--- a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos5433 TMU sensor configuration
- *
- * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <75>;
-samsung,tmu_min_efuse_value = <40>;
-samsung,tmu_max_efuse_value = <150>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index c0231d0..c414a27 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -637,7 +637,7 @@
clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
<&cmu_peris CLK_SCLK_TMU0>;
clock-names = "tmu_apbif", "tmu_sclk";
- #include "exynos5433-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
status = "disabled";
};

@@ -648,7 +648,7 @@
clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
<&cmu_peris CLK_SCLK_TMU0>;
clock-names = "tmu_apbif", "tmu_sclk";
- #include "exynos5433-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
status = "disabled";
};

@@ -659,7 +659,7 @@
clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
<&cmu_peris CLK_SCLK_TMU1>;
clock-names = "tmu_apbif", "tmu_sclk";
- #include "exynos5433-tmu-g3d-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
status = "disabled";
};

@@ -670,7 +670,7 @@
clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
<&cmu_peris CLK_SCLK_TMU1>;
clock-names = "tmu_apbif", "tmu_sclk";
- #include "exynos5433-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
status = "disabled";
};

@@ -681,7 +681,7 @@
clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
<&cmu_peris CLK_SCLK_TMU1>;
clock-names = "tmu_apbif", "tmu_sclk";
- #include "exynos5433-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
status = "disabled";
};

diff --git a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
deleted file mode 100644
index 4849471..0000000
--- a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos7 TMU sensor configuration
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <9>;
-samsung,tmu_reference_voltage = <17>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <75>;
-samsung,tmu_min_efuse_value = <15>;
-samsung,tmu_max_efuse_value = <100>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index ad9dce6..8834879 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -589,7 +589,7 @@
clocks = <&clock_peris PCLK_TMU>,
<&clock_peris SCLK_TMU>;
clock-names = "tmu_apbif", "tmu_sclk";
- #include "exynos7-tmu-sensor-conf.dtsi"
+ #thermal-sensor-cells = <0>;
};

thermal-zones {
--
1.9.1
\
 
 \ /
  Last update: 2018-04-16 12:15    [W:0.097 / U:5.728 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site