lkml.org 
[lkml]   [2018]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] NVMe: Add Quirk Delay before CHK RDY for Seagate Nytro Flash Storage
Date
Add Seagate Nytro Flash Storage nvme drive to quirk list for
NVME_QUIRK_DELAY_BEFORE_CHK_RDY, which solves a bug where the drive is
probed on hot-add before the firmare is ready, I/O errors are generated
while reading sector 0, and linux is "unable to read partition table".
This has occurred when the drive is in an NVME drive slot adjacent to an
Intel drive.

Intel (Keith Busch and Pragyan Pathi) and Seagate (Jeffery Wang
and Kieulien Dang) agreed to add this quirk in off-list discussion.

Signed-off-by: micah.parrish@hpe.com

--- linux/drivers/nvme/host/pci.c.orig 2018-04-05 13:52:23.048890019 -0600
+++ linux/drivers/nvme/host/pci.c 2018-04-09 11:20:57.432900569 -0600
@@ -2687,6 +2687,8 @@ static const struct pci_device_id nvme_i
.driver_data = NVME_QUIRK_NO_DEEPEST_PS },
{ PCI_VDEVICE(INTEL, 0x5845), /* Qemu emulated controller */
.driver_data = NVME_QUIRK_IDENTIFY_CNS, },
+ { PCI_DEVICE(0x1bb1, 0x0100), /* Seagate Nytro Flash Storage */
+ .driver_data = NVME_QUIRK_DELAY_BEFORE_CHK_RDY, },
{ PCI_DEVICE(0x1c58, 0x0003), /* HGST adapter */
.driver_data = NVME_QUIRK_DELAY_BEFORE_CHK_RDY, },
{ PCI_DEVICE(0x1c58, 0x0023), /* WDC SN200 adapter */
\
 
 \ /
  Last update: 2018-04-12 21:33    [W:0.036 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site