lkml.org 
[lkml]   [2018]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] reset: uniphier: fix USB clock line for LD20
Date
For LD20, the bit 5 of the offset 0x200c turned out to be a USB3
reset. The hardware document says it is the GIO reset despite LD20
has no GIO bus, confusingly.

Also, fix confusing comments for PXs3.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

drivers/reset/reset-uniphier.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index 360e06b..ac18f2f 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -110,7 +110,7 @@ static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
UNIPHIER_RESETX(6, 0x200c, 6), /* Ether */
UNIPHIER_RESETX(8, 0x200c, 8), /* STDMAC (HSC) */
- UNIPHIER_RESETX(12, 0x200c, 5), /* GIO (PCIe, USB3) */
+ UNIPHIER_RESETX(14, 0x200c, 5), /* USB30 */
UNIPHIER_RESETX(16, 0x200c, 12), /* USB30-PHY0 */
UNIPHIER_RESETX(17, 0x200c, 13), /* USB30-PHY1 */
UNIPHIER_RESETX(18, 0x200c, 14), /* USB30-PHY2 */
@@ -127,8 +127,8 @@ static const struct uniphier_reset_data uniphier_pxs3_sys_reset_data[] = {
UNIPHIER_RESETX(6, 0x200c, 9), /* Ether0 */
UNIPHIER_RESETX(7, 0x200c, 10), /* Ether1 */
UNIPHIER_RESETX(8, 0x200c, 12), /* STDMAC */
- UNIPHIER_RESETX(12, 0x200c, 4), /* USB30 link (GIO0) */
- UNIPHIER_RESETX(13, 0x200c, 5), /* USB31 link (GIO1) */
+ UNIPHIER_RESETX(12, 0x200c, 4), /* USB30 link */
+ UNIPHIER_RESETX(13, 0x200c, 5), /* USB31 link */
UNIPHIER_RESETX(16, 0x200c, 16), /* USB30-PHY0 */
UNIPHIER_RESETX(17, 0x200c, 18), /* USB30-PHY1 */
UNIPHIER_RESETX(18, 0x200c, 20), /* USB30-PHY2 */
--
2.7.4
\
 
 \ /
  Last update: 2018-04-12 04:18    [W:0.033 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site