lkml.org 
[lkml]   [2018]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: omap4-droid4: voice call support was Re: [PATCHv5,5/5] ARM: dts: omap4-droid4: add soundcard
* Tony Lindgren <tony@atomide.com> [180329 22:00]:
> If it entered low-power mode, in theory we should see the state
> change interrupt that's handled by phy-mapphone-mdm6600.c.
> I never managed to do that so far so maybe you figured it out
> with some command.

And looks like the trigger to mdm6600 to enter low power states
is done via USB:

# echo auto > /sys/devices/platform/44000000.ocp/4a064000.usbhshost/4a064800.ohci/usb1/1-1/power/level

Looks like with that and modem enabled I'm seeing 207mW power
consumption on a and idle system with screen off on my power supply.
Opening /dev/ttyUSB4 makes the power consumption go up to 502mW..
So now we need the wakeirqs and PM runtime to work for ohci and
then the device can be used for few hours on batteries.

Regards,

Tony

\
 
 \ /
  Last update: 2018-04-02 01:19    [W:0.080 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site