lkml.org 
[lkml]   [2018]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder
Date
Document Thine THC63LVD1024 LVDS decoder.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
.../bindings/display/bridge/thine,thc63lvd1024.txt | 59 ++++++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
new file mode 100644
index 0000000..53b6453
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
@@ -0,0 +1,59 @@
+THine Electronics THC63LVD1024 LVDS receiver
+--------------------------------------------
+
+The THC63LVD1024 is an LVDS receiver designed to convert multiple LVDS streams
+to digital CMOS/TTL parallel data.
+
+Required properties:
+- compatible: Shall be one of the following:
+ "thine,thc63lvd1024",
+ "lvds-decoder"
+
+Optional properties:
+- supply-vcc: Power supply for TTL output and digital circuitry
+- supply-cvcc: Power supply for TTL CLOCKOUT signal
+- supply-lvcc: Power supply for LVDS inputs
+- supply-pvcc: Power supply for PLL circuitry
+- pwnd-gpio: Power down GPIO signal. Active low.
+- oe-gpio: Output enable GPIO signal. Active high.
+
+The THC63LVD1024 has two video ports, whose connections are modeled according
+to OF graph bindings specified by Documentation/devicetree/bindings/graph.txt
+
+- Port@0: LVDS input port
+- Port@1: Digital CMOS/TTL parallel output
+
+Example:
+-------
+
+ lvds_decoder: decoder-0 {
+ compatible = "thine,thc63lvd1024";
+
+ vcc-supply = <&reg_lvds_vcc>;
+ lvcc-supply = <&reg_lvds_lvcc>;
+
+ pwdn-gpio = <&gpio4 15 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_dec_in: endpoint {
+ remote-endpoint = <&lvds_out>;
+ };
+ };
+
+ port@1{
+ reg = <1>;
+
+ lvds_dec_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+
+ };
+
+ };
+ };
--
2.7.4
\
 
 \ /
  Last update: 2018-03-08 16:25    [W:0.095 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site