lkml.org 
[lkml]   [2018]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V1] Input: pm8941-pwrkey: add resin key capabilities
Hi Tirupathi,

On Wed, Mar 07, 2018 at 01:39:33PM +0530, Tirupathi Reddy wrote:
> Add resin key support to handle different types of key events
> defined in different platforms.
>
> Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
> ---
> .../bindings/input/qcom,pm8941-pwrkey.txt | 20 ++++++-
> drivers/input/misc/pm8941-pwrkey.c | 63 +++++++++++++++++++++-
> 2 files changed, 81 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> index 07bf55f..1c437e9 100644
> --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> @@ -20,6 +20,14 @@ PROPERTIES
> defined by the binding document describing the node's
> interrupt parent.
>
> +- interrupt-names:
> + Usage: required
> + Value type: <stringlist>
> + Definition: Interrupt names. This list must match up 1-to-1 with the
> + interrupts specified in the 'interrupts' property. "kpdpwr"
> + must be specified. "resin" may be specified for some
> + platforms.
> +
> - debounce:
> Usage: optional
> Value type: <u32>
> @@ -32,12 +40,22 @@ PROPERTIES
> Definition: presence of this property indicates that the KPDPWR_N pin
> should be configured for pull up.
>
> +- linux,code:
> + Usage: required for "resin" key
> + Value type: <u32>
> + Definition: The input key-code associated with the resin key.
> + Use the linux event codes defined in
> + include/dt-bindings/input/linux-event-codes.h
> +
> EXAMPLE
>
> pwrkey@800 {
> compatible = "qcom,pm8941-pwrkey";
> reg = <0x800>;
> - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>,
> + <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> + interrupt-names = "kpdpwr", "resin";
> debounce = <15625>;
> bias-pull-up;
> + linux,code = <KEY_VOLUMEDOWN>;
> };
> diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
> index 18ad956..3f801cf 100644
> --- a/drivers/input/misc/pm8941-pwrkey.c
> +++ b/drivers/input/misc/pm8941-pwrkey.c
> @@ -28,6 +28,7 @@
>
> #define PON_RT_STS 0x10
> #define PON_KPDPWR_N_SET BIT(0)
> +#define PON_RESIN_N_SET BIT(1)
>
> #define PON_PS_HOLD_RST_CTL 0x5a
> #define PON_PS_HOLD_RST_CTL2 0x5b
> @@ -46,6 +47,8 @@
> struct pm8941_pwrkey {
> struct device *dev;
> int irq;
> + int resin_irq;
> + u32 resin_key_code;
> u32 baseaddr;
> struct regmap *regmap;
> struct input_dev *input;
> @@ -130,6 +133,24 @@ static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
> return IRQ_HANDLED;
> }
>
> +static irqreturn_t pm8941_resinkey_irq(int irq, void *_data)
> +{
> + struct pm8941_pwrkey *pwrkey = _data;
> + unsigned int sts;
> + int error;
> +
> + error = regmap_read(pwrkey->regmap,
> + pwrkey->baseaddr + PON_RT_STS, &sts);
> + if (error)
> + return IRQ_HANDLED;

It looks like you are reading the same register as the power on key.
Won't you lose events if both are pressed at the same time?

I think you need a unified interrupt handler...

> +
> + input_report_key(pwrkey->input, pwrkey->resin_key_code,
> + !!(sts & PON_RESIN_N_SET));
> + input_sync(pwrkey->input);
> +
> + return IRQ_HANDLED;
> +}
> +
> static int __maybe_unused pm8941_pwrkey_suspend(struct device *dev)
> {
> struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
> @@ -153,6 +174,35 @@ static int __maybe_unused pm8941_pwrkey_resume(struct device *dev)
> static SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops,
> pm8941_pwrkey_suspend, pm8941_pwrkey_resume);
>
> +static int pm8941_resin_key_init(struct pm8941_pwrkey *pwrkey)
> +{
> + int error;
> +
> + /*
> + * Get the standard-key parameters. This might not be
> + * specified if there is no key mapping on the reset line.
> + */
> + error = of_property_read_u32(pwrkey->dev->of_node, "linux,code",
> + &pwrkey->resin_key_code);
> + if (error) {
> + dev_err(pwrkey->dev, "failed to read key-code for resin key\n");
> + return error;
> + }
> +
> + /* Register key configuration */
> + input_set_capability(pwrkey->input, EV_KEY, pwrkey->resin_key_code);
> +
> + error = devm_request_threaded_irq(pwrkey->dev, pwrkey->resin_irq,
> + NULL, pm8941_resinkey_irq,
> + IRQF_ONESHOT,
> + "pm8941_resinkey", pwrkey);
> + if (error)
> + dev_err(pwrkey->dev, "failed requesting resin key IRQ: %d\n",
> + error);
> +
> + return error;
> +}
> +
> static int pm8941_pwrkey_probe(struct platform_device *pdev)
> {
> struct pm8941_pwrkey *pwrkey;
> @@ -182,7 +232,7 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
> return -ENODEV;
> }
>
> - pwrkey->irq = platform_get_irq(pdev, 0);
> + pwrkey->irq = platform_get_irq_byname(pdev, "kpdpwr");

You are breaking support for old DTS here I'm afraid.

> if (pwrkey->irq < 0) {
> dev_err(&pdev->dev, "failed to get irq\n");
> return pwrkey->irq;
> @@ -241,6 +291,17 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
> return error;
> }
>
> + pwrkey->resin_irq = platform_get_irq_byname(pdev, "resin");
> + if (pwrkey->resin_irq >= 0) {

This is not entirely correct. I'd say if you have -ENXIO you can
conclude that the support for "resin" key is not enabled, but the rest
of the errors you should report up the stack. Deferrals will be retried
and other errors are fatal.

> + /* resin key capabilities are defined in device node */
> + error = pm8941_resin_key_init(pwrkey);
> + if (error) {
> + dev_err(&pdev->dev, "failed resin key initialization: %d\n",
> + error);
> + return error;
> + }
> + }
> +
> error = input_register_device(pwrkey->input);
> if (error) {
> dev_err(&pdev->dev, "failed to register input device: %d\n",
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
>

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2018-03-07 21:22    [W:0.045 / U:4.300 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site