lkml.org 
[lkml]   [2018]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 6/8] DT: arm: Add Renesas RZ/N1 SoC base device tree file
Hi Simon, Michel,

On Fri, Mar 30, 2018 at 09:25:16AM +0200, Simon Horman wrote:
> On Thu, Mar 29, 2018 at 01:04:50PM +0200, jacopo mondi wrote:
> > Hi Michel
> >
> > The subject of all your patches for arch/arm should start with:
> >
> > ARM: dts:
> >
> > A git log on that directory clearly shows that's the preferred one.
> >
> > I would also say that you are missing a symbol definition in
> > arch/arm/mach-shmobile/Kconfig
> > (even if you got rid of any board file)
> >
> > I would expect a symbol to select in menuconfig, with your
> > dependencies listed there (ie, the serial interface driver)
> >
> > Something like this (I left the 'xx' out from the part name on purpose)
> >
> > diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
> > index 280e731..9a519330 100644
> > --- a/arch/arm/mach-shmobile/Kconfig
> > +++ b/arch/arm/mach-shmobile/Kconfig
> > @@ -114,4 +114,8 @@ config ARCH_SH73A0
> > bool "SH-Mobile AG5 (R8A73A00)"
> > select ARCH_RMOBILE
> > select RENESAS_INTC_IRQPIN
> > +
> > +config ARCH_R9A06G0
> > + bool "RZ/N1 (R9A06G0)"
> > + select SERIAL_8250_DW
> > endif
> >
> > But please wait for others (preferibly Geert or Simon) to confim this.
>
> I think that is covered by
> "[PATCH v3 5/8] arm: shmobile: Add the RZ/N1 arch to the shmobile Kconfig"
>

I somehow didn't apply that patch from the series when reviewing.

Sorry for the fuss.

Thanks
j

> > On Thu, Mar 29, 2018 at 08:47:02AM +0100, Michel Pollet wrote:
> > > This adds the Renesas RZ/N1 Family (Part #R9A06G0xx) SoC
> > > bare bone support.
> > >
> > > This currently only handles generic parts (gic, architected timer)
> > > and a UART.
> > > For simplicity sake, this also relies on the bootloader to set the
> > > pinctrl and clocks.
> > >
> > > Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com>
> > > ---
> > > arch/arm/boot/dts/r9a06g0xx.dtsi | 96 ++++++++++++++++++++++++++++++++++++++++
> > > 1 file changed, 96 insertions(+)
> > > create mode 100644 arch/arm/boot/dts/r9a06g0xx.dtsi
> > >
> > > diff --git a/arch/arm/boot/dts/r9a06g0xx.dtsi b/arch/arm/boot/dts/r9a06g0xx.dtsi
> > > new file mode 100644
> > > index 0000000..c6eeee3
> > > --- /dev/null
> > > +++ b/arch/arm/boot/dts/r9a06g0xx.dtsi
> > > @@ -0,0 +1,96 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Base Device Tree Source for the Renesas RZ/N1 SoC Family of devices
> > > + *
> > > + * Copyright (C) 2018 Renesas Electronics Europe Limited
> > > + *
> > > + */
> > > +
> > > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > > +
> > > +/ {
> > > + compatible = "renesas,rzn1";
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > +
> > > + cpus {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + cpu@0 {
> > > + device_type = "cpu";
> > > + compatible = "arm,cortex-a7";
> > > + reg = <0>;
> > > + };
> > > + cpu@1 {
> > > + device_type = "cpu";
> > > + compatible = "arm,cortex-a7";
> > > + reg = <1>;
> > > + };
> > > + };
> >
> > I see you don't like empy lines, that's fine, it is not a strict
> > requiremen afaik, but I find a few empty lines here and there more
> > redable, expecially if the file is going to grow, as it will be.
>
> Please place one empty line between each node.
>
> > > + clocks {
> > > + /*
> > > + * this is fixed clock for now,
> > > + * until the clock driver is merged
> > > + */
> > > + clkuarts: clkuarts {
> >
> > You can remove the node lable if it's the same as the node name afaik
> >
> > > + #clock-cells = <0>;
> > > + compatible = "fixed-clock";
> > > + clock-frequency = <47619047>;
> > > + };
> > > + };
> >
> > Grouping clock nodes under a "clocks" one is now deprecated.
> >
> > Please see, ie.
> > "ARM: dts: r7s72100: stop grouping clocks under a "clocks" subnode"
>
> Also, please sort sub-nodes of the root node alphabetically.
>
> > Thanks
> > j
> >
> > > + arch-timer {
> > > + compatible = "arm,cortex-a7-timer",
> > > + "arm,armv7-timer";
> > > + interrupt-parent = <&gic>;
> > > + arm,cpu-registers-not-fw-configured;
> > > + interrupts =
> > > + <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
> > > + IRQ_TYPE_LEVEL_LOW)>,
> > > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
> > > + IRQ_TYPE_LEVEL_LOW)>,
> > > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
> > > + IRQ_TYPE_LEVEL_LOW)>,
> > > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
> > > + IRQ_TYPE_LEVEL_LOW)>;
>
> I think its nicer not to line-wrap the individual interrupts.
> I.e. please make the above like this:
>
> interrupts =
> <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
>
> > > + };
> > > + soc {
> > > + compatible = "simple-bus";
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + interrupt-parent = <&gic>;
> > > + ranges;
> > > +
> > > + gic: gic@44101000 {
>
> Please sort subnodes of the soc node using:
> - Primary key of bus address
> - Secondary key of IP block type (does not apply here)
>
>
> > > + compatible = "arm,cortex-a7-gic", "arm,gic-400";
> > > + interrupt-controller;
> > > + #interrupt-cells = <3>;
> > > + reg = <0x44101000 0x1000>, /* Distributer */
> > > + <0x44102000 0x2000>, /* CPU interface */
> > > + <0x44104000 0x2000>, /* Virt interface control */
> > > + <0x44106000 0x2000>; /* Virt CPU interface */
> > > + interrupts =
> > > + <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
> > > + IRQ_TYPE_LEVEL_HIGH)>;
> > > + };
> > > + sysctrl: sysctrl@4000c000 {
> > > + compatible = "renesas,rzn1-sysctrl", "syscon",
> > > + "simple-mfd";
> > > + reg = <0x4000c000 0x1000>;
> > > +
> > > + reboot {
> > > + compatible = "renesas,rzn1-reboot";
> > > + };
> > > + };
> > > + uart0: serial@40060000 {
> > > + compatible = "snps,dw-apb-uart";
> > > + reg = <0x40060000 0x400>;
> > > + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> > > + reg-shift = <2>;
> > > + reg-io-width = <4>;
> > > + clocks = <&clkuarts>;
> > > + clock-names = "baudclk";
> > > + status = "disabled";
> > > + };
> > > + };
> > > +};
> > > --
> > > 2.7.4
> > >
>
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-03-31 18:21    [W:0.266 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site