lkml.org 
[lkml]   [2018]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messages
Date
Several messages from the MIPS GIC driver include the text "GIC", "GIC
timer", etc, but the format is not standard. Add a pr_fmt of
"mips-gic-timer: " and reword the messages now that they will be
prefixed with the driver name.

Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
---

Changes in v2:
Rebase on v4.16-rc7

drivers/clocksource/mips-gic-timer.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c
index 986b6796b631..54f8a331b53a 100644
--- a/drivers/clocksource/mips-gic-timer.c
+++ b/drivers/clocksource/mips-gic-timer.c
@@ -5,6 +5,9 @@
*
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
+
+#define pr_fmt(fmt) "mips-gic-timer: " fmt
+
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/cpu.h>
@@ -136,8 +139,7 @@ static int gic_clockevent_init(void)

ret = setup_percpu_irq(gic_timer_irq, &gic_compare_irqaction);
if (ret < 0) {
- pr_err("GIC timer IRQ %d setup failed: %d\n",
- gic_timer_irq, ret);
+ pr_err("IRQ %d setup failed (%d)\n", gic_timer_irq, ret);
return ret;
}

@@ -176,7 +178,7 @@ static int __init __gic_clocksource_init(void)

ret = clocksource_register_hz(&gic_clocksource, gic_frequency);
if (ret < 0)
- pr_warn("GIC: Unable to register clocksource\n");
+ pr_warn("Unable to register clocksource\n");

return ret;
}
@@ -188,7 +190,7 @@ static int __init gic_clocksource_of_init(struct device_node *node)

if (!mips_gic_present() || !node->parent ||
!of_device_is_compatible(node->parent, "mti,gic")) {
- pr_warn("No DT definition for the mips gic driver\n");
+ pr_warn("No DT definition\n");
return -ENXIO;
}

@@ -196,7 +198,7 @@ static int __init gic_clocksource_of_init(struct device_node *node)
if (!IS_ERR(clk)) {
ret = clk_prepare_enable(clk);
if (ret < 0) {
- pr_err("GIC failed to enable clock\n");
+ pr_err("Failed to enable clock\n");
clk_put(clk);
return ret;
}
@@ -204,12 +206,12 @@ static int __init gic_clocksource_of_init(struct device_node *node)
gic_frequency = clk_get_rate(clk);
} else if (of_property_read_u32(node, "clock-frequency",
&gic_frequency)) {
- pr_err("GIC frequency not specified.\n");
+ pr_err("Frequency not specified\n");
return -EINVAL;
}
gic_timer_irq = irq_of_parse_and_map(node, 0);
if (!gic_timer_irq) {
- pr_err("GIC timer IRQ not specified.\n");
+ pr_err("IRQ not specified\n");
return -EINVAL;
}

@@ -220,7 +222,7 @@ static int __init gic_clocksource_of_init(struct device_node *node)
ret = gic_clockevent_init();
if (!ret && !IS_ERR(clk)) {
if (clk_notifier_register(clk, &gic_clk_nb) < 0)
- pr_warn("GIC: Unable to register clock notifier\n");
+ pr_warn("Unable to register clock notifier\n");
}

/* And finally start the counter */
--
2.7.4
\
 
 \ /
  Last update: 2018-03-29 14:34    [W:1.513 / U:0.780 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site