lkml.org 
[lkml]   [2018]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/8] efi: Decode IA32/X64 Processor Error Section
On Sat, Mar 24, 2018 at 01:49:34PM -0500, Yazen Ghannam wrote:
> From: Yazen Ghannam <yazen.ghannam@amd.com>
>
> Recognize the IA32/X64 Processor Error Section.
>
> Do the section decoding in a new "cper-x86.c" file and add this to the
> Makefile depending on a new "UEFI_CPER_X86" config option.
>
> Print the Local APIC ID and CPUID info from the Processor Error Record.
>
> The "Processor Error Info" and "Processor Context" fields will be
> decoded in following patches.
>
> Based on UEFI 2.7 Table 252. Processor Error Record.
>
> Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
> ---
> Link:
> https://lkml.kernel.org/r/20180226193904.20532-3-Yazen.Ghannam@amd.com
>
> v2->v3:
> * Fix table number in commit message.
> * Don't print raw validation bits.
>
> v1->v2:
> * Change config option depends to "X86" instead of "X86_32 || X64_64".
> * Remove extra newline in Makefile changes.
> * Drop author copyright line.
>
> drivers/firmware/efi/Kconfig | 5 +++++
> drivers/firmware/efi/Makefile | 1 +
> drivers/firmware/efi/cper-x86.c | 23 +++++++++++++++++++++++

I'd prefer if that were:

drivers/firmware/efi/cper/x86.c
drivers/firmware/efi/cper/arm.c

but that's Ard's call.

> drivers/firmware/efi/cper.c | 10 ++++++++++
> include/linux/cper.h | 2 ++
> 5 files changed, 41 insertions(+)
> create mode 100644 drivers/firmware/efi/cper-x86.c
>
> diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig
> index 3098410abad8..781a4a337557 100644
> --- a/drivers/firmware/efi/Kconfig
> +++ b/drivers/firmware/efi/Kconfig
> @@ -174,6 +174,11 @@ config UEFI_CPER_ARM
> depends on UEFI_CPER && ( ARM || ARM64 )
> default y
>
> +config UEFI_CPER_X86
> + bool
> + depends on UEFI_CPER && X86
> + default y
> +
> config EFI_DEV_PATH_PARSER
> bool
> depends on ACPI
> diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile
> index cb805374f4bc..5f9f5039de50 100644
> --- a/drivers/firmware/efi/Makefile
> +++ b/drivers/firmware/efi/Makefile
> @@ -31,3 +31,4 @@ obj-$(CONFIG_ARM) += $(arm-obj-y)
> obj-$(CONFIG_ARM64) += $(arm-obj-y)
> obj-$(CONFIG_EFI_CAPSULE_LOADER) += capsule-loader.o
> obj-$(CONFIG_UEFI_CPER_ARM) += cper-arm.o
> +obj-$(CONFIG_UEFI_CPER_X86) += cper-x86.o
> diff --git a/drivers/firmware/efi/cper-x86.c b/drivers/firmware/efi/cper-x86.c
> new file mode 100644
> index 000000000000..863f0cd2a0ff
> --- /dev/null
> +++ b/drivers/firmware/efi/cper-x86.c
> @@ -0,0 +1,23 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) 2018, Advanced Micro Devices, Inc.
> +
> +#include <linux/cper.h>
> +
> +/*
> + * We don't need a "CPER_IA" prefix since these are all locally defined.
> + * This will save us a lot of line space.
> + */
> +#define VALID_LAPIC_ID BIT_ULL(0)
> +#define VALID_CPUID_INFO BIT_ULL(1)
> +
> +void cper_print_proc_ia(const char *pfx, const struct cper_sec_proc_ia *proc)
> +{
> + if (proc->validation_bits & VALID_LAPIC_ID)
> + printk("%sLocal APIC_ID: 0x%llx\n", pfx, proc->lapic_id);
> +
> + if (proc->validation_bits & VALID_CPUID_INFO) {
> + printk("%sCPUID Info:\n", pfx);
> + print_hex_dump(pfx, "", DUMP_PREFIX_OFFSET, 16, 4, proc->cpuid,
> + sizeof(proc->cpuid), 0);

That's dumping 48 bytes of static information for every error!
Information which can be dumped only once when collecting system info.

--
Regards/Gruss,
Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

\
 
 \ /
  Last update: 2018-03-29 11:48    [W:0.089 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site