lkml.org 
[lkml]   [2018]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: `do_IRQ: 1.55 No irq handler for vector` on ASRock E350M1
From
Date
Hi Tom & Thomas,

> On Feb 27, 2018, at 12:42 AM, Tom Lendacky <thomas.lendacky@amd.com> wrote:
>
> On 2/26/2018 10:37 AM, Morton, Eric wrote:
>> Thomas,
>>
>> Yazen dug out PLAT-21393 as sounding like this issue. I haven't had a
>> chance to digest it.
>
> Yes, internally to AMD, that was the bug that tracked the issue I was
> referring to.

There's also another user [1] affected by this issue.

Ethernet r8169 failed to work after system suspend:

[ 150.944101] do_IRQ: 3.37 No irq handler for vector
[ 150.944105] r8169 0000:01:00.0 enp1s0: link down

It's a regression started from v4.15-rc5.

[1] https://bugs.launchpad.net/bugs/1752772

Kai-Heng

>
> Thanks,
> Tom
>
>> Eric
>>
>> On 2/26/18, 10:31 AM, "Borislav Petkov" <bp@alien8.de> wrote:
>>
>> On Mon, Feb 26, 2018 at 10:14:10AM -0600, Tom Lendacky wrote:
>>> On 2/24/2018 2:59 AM, Thomas Gleixner wrote:
>>>> On Sat, 24 Feb 2018, Paul Menzel wrote:
>>>>> Am 23.02.2018 um 20:09 schrieb Borislav Petkov:
>>>>>> On Fri, Feb 23, 2018 at 07:18:34PM +0100, Thomas Gleixner wrote:
>>>>>>> Borislav is seeing similar issues on larger AMD machines. The
>>>>>>> interrupt
>>>>>>> seems to come from BIOS/microcode during bringup of secondary CPUs
>>>>>>> and we
>>>>>>> have no idea why.
>>>>>>
>>>>>> Paul, can you boot 4.14 and grep your dmesg for something like:
>>>>>>
>>>>>> [ 0.000000] spurious 8259A interrupt: IRQ7. >
>>>>>> ?
>>>>>
>>>>> No, I do not see that. Please find the logs attached.
>>>>
>>>> From your 4.14 log:
>>>>
>>>> Feb 19 09:48:06.843173 kodi kernel: CPU 0 irqstacks, hard=e9b0a000
>>>> soft=e9b0c000
>>>> Feb 19 09:48:06.843216 kodi kernel: spurious 8259A interrupt: IRQ7.
>>>
>>> I think I remember seeing something like this previously and it turned
>>> out
>>> to be a BIOS bug. All the AP's were enabled to work with the legacy 8259
>>> interrupt controller. In an SMP system, only one processor in the system
>>> should be configured to handle legacy 8259 interrupts (ExtINT delivery
>>> mode - see Intel's SDM, Volume 3, section 10.5.1, Delivery Mode). Once
>>> the BIOS was fixed, the spurious interrupt message went away.
>>>
>>> I believe at some point during UEFI, the APs were exposed to an ExtINT
>>> interrupt. Since they were configured to handle ExtINT delivery mode and
>>> interrupts were not yet enabled, the interrupt was left pending. When
>>> the
>>> APs were started by the OS and interrupts were enabled, the interrupt
>>> triggered. Since the original pending interrupt was handled by the BSP,
>>> there was no longer an interrupt actually pending, so the 8259 responds
>>> with IRQ 7 when queried by the OS. This occurred for each AP.
>>
>> Interesting - is this something that can happen on Zen too?
>>
>> Because I have such reports too.
>>
>> --
>> Regards/Gruss,
>> Boris.
>>
>> Good mailing practices for 400: avoid top-posting and trim the reply.

\
 
 \ /
  Last update: 2018-03-29 09:22    [W:0.414 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site