lkml.org 
[lkml]   [2018]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] usb: dwc3: gadget: Correct the logic for queuing sgs
Date
From: Anurag Kumar Vulisha <anuragku@xilinx.com>

The present code correctly fetches the req which were previously not
queued from the started_list but fails to continue queuing from the sg
where it previously stopped queuing (because of the unavailable TRB's).
This patch correct's the code to continue queuing from the correct sg
present in the sglist.

For example, consider 5 sgs in req. Because of limited TRB's among the
5 sgs only 3 got queued. This patch corrects the code to start queuing
from correct sg i.e 4th sg when the TRBs are available.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
---
Changes in v2:
1. Split the single patch into 2 patches as suggested by Felipe Balbi
2. Added dev_WARN_ONCE message when ((req->request.actual == length) &&
(req->num_pending_sgs > 0))
---
drivers/usb/dwc3/core.h | 2 ++
drivers/usb/dwc3/gadget.c | 23 ++++++++++++++++++++---
2 files changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 1406c4f..6bce913 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -720,6 +720,7 @@ struct dwc3_hwparams {
* @sg: pointer to first incomplete sg
* @start_sg: pointer to the sg which should be queued next
* @num_pending_sgs: counter to pending sgs
+ * @num_queued_sgs: counter to the number of sgs which already got queued
* @remaining: amount of data remaining
* @epnum: endpoint number to which this request refers
* @trb: pointer to struct dwc3_trb
@@ -738,6 +739,7 @@ struct dwc3_request {
struct scatterlist *start_sg;

unsigned num_pending_sgs;
+ unsigned int num_queued_sgs;
unsigned remaining;
u8 epnum;
struct dwc3_trb *trb;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 330a4de..ff62e13 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1060,7 +1060,10 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
struct scatterlist *s;
int i;

- for_each_sg(sg, s, req->num_pending_sgs, i) {
+ unsigned int remaining = req->request.num_mapped_sgs
+ - req->num_queued_sgs;
+
+ for_each_sg(sg, s, remaining, i) {
unsigned int length = req->request.length;
unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
unsigned int rem = length % maxp;
@@ -1099,6 +1102,8 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
if (chain)
req->start_sg = sg_next(s);

+ req->num_queued_sgs++;
+
if (!dwc3_calc_trbs_left(dep))
break;
}
@@ -1190,6 +1195,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep)

req->sg = req->request.sg;
req->start_sg = req->sg;
+ req->num_queued_sgs = 0;
req->num_pending_sgs = req->request.num_mapped_sgs;

if (req->num_pending_sgs > 0)
@@ -2346,8 +2352,19 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,

req->request.actual = length - req->remaining;

- if ((req->request.actual < length) && req->num_pending_sgs)
- return __dwc3_gadget_kick_transfer(dep);
+ if (req->request.actual < length || req->num_pending_sgs) {
+ /*
+ * There could be a scenario where the whole req can't
+ * be mapped into available TRB's. In that case, we need
+ * to kick transfer again if (req->num_pending_sgs > 0)
+ */
+ if (req->num_pending_sgs) {
+ dev_WARN_ONCE(dwc->dev,
+ (req->request.actual == length),
+ "There are some pending sg's that needs to be queued again\n");
+ return __dwc3_gadget_kick_transfer(dep);
+ }
+ }

dwc3_gadget_giveback(dep, req, status);

--
2.1.1
\
 
 \ /
  Last update: 2018-03-27 13:06    [W:0.090 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site