lkml.org 
[lkml]   [2018]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 6/8] MIPS: mscc: Add switch to ocelot
Date
Ocelot has an integrated switch, add support for it.

Cc: James Hogan <jhogan@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
arch/mips/boot/dts/mscc/ocelot.dtsi | 84 +++++++++++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)

diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
index dd239cab2f9d..22a86373b1c9 100644
--- a/arch/mips/boot/dts/mscc/ocelot.dtsi
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -91,6 +91,69 @@
status = "disabled";
};

+ switch@1010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mscc,ocelot-switch";
+ reg = <0x1010000 0x10000>,
+ <0x1030000 0x10000>,
+ <0x1080000 0x100>,
+ <0x10d0000 0x10000>,
+ <0x11e0000 0x100>,
+ <0x11f0000 0x100>,
+ <0x1200000 0x100>,
+ <0x1210000 0x100>,
+ <0x1220000 0x100>,
+ <0x1230000 0x100>,
+ <0x1240000 0x100>,
+ <0x1250000 0x100>,
+ <0x1260000 0x100>,
+ <0x1270000 0x100>,
+ <0x1280000 0x100>,
+ <0x1800000 0x80000>,
+ <0x1880000 0x10000>;
+ reg-names = "sys", "rew", "qs", "hsio", "port0",
+ "port1", "port2", "port3", "port4", "port5",
+ "port6", "port7", "port8", "port9", "port10",
+ "qsys", "ana";
+ interrupts = <21 22>;
+ interrupt-names = "xtr", "inj";
+
+ port0: port@0 {
+ reg = <0>;
+ };
+ port1: port@1 {
+ reg = <1>;
+ };
+ port2: port@2 {
+ reg = <2>;
+ };
+ port3: port@3 {
+ reg = <3>;
+ };
+ port4: port@4 {
+ reg = <4>;
+ };
+ port5: port@5 {
+ reg = <5>;
+ };
+ port6: port@6 {
+ reg = <6>;
+ };
+ port7: port@7 {
+ reg = <7>;
+ };
+ port8: port@8 {
+ reg = <8>;
+ };
+ port9: port@9 {
+ reg = <9>;
+ };
+ port10: port@10 {
+ reg = <10>;
+ };
+ };
+
reset@1070008 {
compatible = "mscc,ocelot-chip-reset";
reg = <0x1070008 0x4>;
@@ -113,5 +176,26 @@
function = "uart2";
};
};
+
+ mdio0: mdio@107009c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mscc,ocelot-miim";
+ reg = <0x107009c 0x36>, <0x10700f0 0x8>;
+ interrupts = <14>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+ };
};
};
--
2.16.2
\
 
 \ /
  Last update: 2018-03-23 21:15    [W:1.277 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site