lkml.org 
[lkml]   [2018]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
From
Date
On 16/03/18 13:00, Felipe Balbi wrote:
>
> Hi,
>
> Roger Quadros <rogerq@ti.com> writes:
>
>> Hi Felipe,
>>
>> On 09/03/18 14:47, Roger Quadros wrote:
>>> In the following test we get stuck by sleeping forever in _dwc3_set_mode()
>>> after which dual-role switching doesn't work.
>>>
>>> On dra7-evm's dual-role port,
>>> - Load g_zero gadget driver and enumerate to host
>>> - suspend to mem
>>> - disconnect USB cable to host and connect otg cable with Pen drive in it.
>>> - resume system
>>> - we sleep indefinitely in _dwc3_set_mode due to.
>>> dwc3_gadget_exit()->usb_del_gadget_udc()->udc_stop()->
>>> dwc3_gadget_stop()->wait_event_lock_irq()
>>>
>>> To fix this instead of waiting indefinitely with wait_event_lock_irq()
>>> we use wait_event_interruptible_lock_irq_timeout() and print
>>> and error message if there was a timeout.
>>>
>>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>>
>> Thanks for picking this for -next.
>> Is it better to have this in v4.16-rc fixes?
>> and also stable? v4.12+
>
> Well, there was no "Fixes: foobar" or "Cc: stable" lines in the commit
> log ;-)
>
> The best we can do now, is wait for -rc1 and manually send the commit to
> stable.
>

That's fine. Thanks.

--
cheers,
-roger

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2018-03-16 12:03    [W:0.108 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site