lkml.org 
[lkml]   [2018]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: qcom-apq8064: disable i2c by default at soc dtsi
Date
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

This patch marks all the gsbi i2c node at soc level dtsi, so that kernel
would not assume that its enabled and result in pin conflicts when gsbi
is used for UART or SPI.

Without this patch we see below pin conflict.

apq8064-pinctrl 800000.pinctrl: pin GPIO_20 already requested by
12450000.serial; cannot claim for 12460000.i2c
apq8064-pinctrl 800000.pinctrl: pin-20 (12460000.i2c) status -22
apq8064-pinctrl 800000.pinctrl: could not request pin 20 (GPIO_20)
from group gpio20 on device 800000.pinctrl
i2c_qup 12460000.i2c: Error applying setting, reverse things back
i2c_qup: probe of 12460000.i2c failed with error -22

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 3ca96e361878..54cff79f5725 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -444,6 +444,7 @@
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};

};
@@ -472,6 +473,7 @@
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
};

@@ -497,6 +499,7 @@
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
};

@@ -521,6 +524,7 @@
clocks = <&gcc GSBI4_QUP_CLK>,
<&gcc GSBI4_H_CLK>;
clock-names = "core", "iface";
+ status = "disabled";
};
};

--
2.16.2
\
 
 \ /
  Last update: 2018-03-15 15:46    [W:0.036 / U:1.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site