Messages in this thread | | | From | "Jonas Mark (BT-FIR/ENG1)" <> | Subject | Re: [PATCH] can: enable multi-queue for SocketCAN devices | Date | Thu, 15 Mar 2018 09:08:49 +0000 |
| |
Hello Marc,
> > The driver consists of two layers because the HW is accessed via SPI. > > Normal SPI?
Yes, normal SPI (CLK, MOSI, MISO, SEL) plus two GPIOs for flow control. The CAN peripheral (SPI slave) asserts the additional signals to request a transfer and to signal that it is busy.
> > I will have to check but I am pretty confident that we would be willing > > to publish the driver on these mailing lists as well. We will anyhow > > ship the source code (or a written offer) with every distribution. > > Sure - can I find your devices used and low priced on ebay :) ?
That is rather unlikely. Though, you could buy a building containing one.
> > If you are really serious about the review I will get the process > > rolling for an early publication of our driver. > > Yes, please go ahead!
Ok, I'll kick off the process and start to collect the required signatures.
Greetings, Mark
Bosch Building Technologies, Panel Software Fire (ST-FIR/ENG1) Bosch Sicherheitssysteme GmbH | Postfach 11 11 | 85626 Grasbrunn | GERMANY | www.boschsecurity.com
Sitz: Stuttgart, Registergericht: Amtsgericht Stuttgart HRB 23118 Aufsichtsratsvorsitzender: Stefan Hartung; Geschäftsführung: Gert van Iperen, Andreas Bartz, Thomas Quante, Bernhard Schuster
| |