lkml.org 
[lkml]   [2018]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] net: phy: relax error checking when creating sysfs link netdev->phydev
On Wed, Mar 14, 2018 at 05:26:24PM -0500, Grygorii Strashko wrote:
> Some ethernet drivers (like TI CPSW) may connect and manage >1 Net PHYs per
> one netdevice, as result such drivers will produce warning during system
> boot and fail to connect second phy to netdevice when PHYLIB framework
> will try to create sysfs link netdev->phydev for second PHY
> in phy_attach_direct(), because sysfs link with the same name has been
> created already for the first PHY. As result, second CPSW external
> port will became unusable.
>
> Fix it by relaxing error checking when PHYLIB framework is creating sysfs
> link netdev->phydev in phy_attach_direct(), suppressing warning by using
> sysfs_create_link_nowarn() and adding debug message instead.
>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Fixes: a3995460491d ("net: phy: Relax error checking on sysfs_create_link()")
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> ---
> drivers/net/phy/phy_device.c | 15 +++++++++++----
> 1 file changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index 478405e..fe16f58 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -1012,10 +1012,17 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
> err = sysfs_create_link(&phydev->mdio.dev.kobj, &dev->dev.kobj,
> "attached_dev");
> if (!err) {
> - err = sysfs_create_link(&dev->dev.kobj, &phydev->mdio.dev.kobj,
> - "phydev");
> - if (err)
> - goto error;
> + err = sysfs_create_link_nowarn(&dev->dev.kobj,
> + &phydev->mdio.dev.kobj,
> + "phydev");
> + if (err) {
> + dev_err(&dev->dev, "could not add device link to %s err %d\n",
> + kobject_name(&phydev->mdio.dev.kobj),
> + err);

dev_err() is not a "debugging" message :)

What is a user going to do with this new error? If it's not important
at all, why care about it?

> + /* non-fatal - some net drivers can use one netdevice
> + * with more then one phy
> + */

What about devices that do not have more than one phy and this call
fails for? Shouldn't you check for that?

thanks,

greg k-h

\
 
 \ /
  Last update: 2018-03-15 03:27    [W:0.130 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site