lkml.org 
[lkml]   [2018]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] cpuidle: poll_state: Add time limit to poll_idle()
Date
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

If poll_idle() is allowed to spin until need_resched() returns 'true',
it may actually spin for a much longer time than expected by the idle
governor, since set_tsk_need_resched() is not always called by the
timer interrupt handler. If that happens, the CPU may spend much
more time than anticipated in the "polling" state.

To prevent that from happening, limit the time of the spinning loop
in poll_idle().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---

-> v2: After additional testing reduce POLL_IDLE_TIME_CHECK_COUNT to 1000.

---
drivers/cpuidle/poll_state.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)

Index: linux-pm/drivers/cpuidle/poll_state.c
===================================================================
--- linux-pm.orig/drivers/cpuidle/poll_state.c
+++ linux-pm/drivers/cpuidle/poll_state.c
@@ -5,16 +5,31 @@
*/

#include <linux/cpuidle.h>
+#include <linux/ktime.h>
#include <linux/sched.h>
#include <linux/sched/idle.h>

+#define POLL_IDLE_TIME_CHECK_COUNT 1000
+#define POLL_IDLE_TIME_LIMIT (TICK_NSEC / 16)
+
static int __cpuidle poll_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
+ ktime_t start = ktime_get();
+
local_irq_enable();
if (!current_set_polling_and_test()) {
- while (!need_resched())
+ unsigned int time_check_counter = 0;
+
+ while (!need_resched()) {
cpu_relax();
+ if (time_check_counter++ < POLL_IDLE_TIME_CHECK_COUNT)
+ continue;
+
+ time_check_counter = 0;
+ if (ktime_sub(ktime_get(), start) > POLL_IDLE_TIME_LIMIT)
+ break;
+ }
}
current_clr_polling();


\
 
 \ /
  Last update: 2018-03-12 10:36    [W:0.132 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site