lkml.org 
[lkml]   [2018]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/5] Renesas CEU: SH7724 ECOVEC + Aptina mt9t112
Hi Hans,

On Sat, Mar 10, 2018 at 06:57:17PM +0100, Hans Verkuil wrote:
> Hi Jacopo,
>
> On 02/03/18 17:35, Jacopo Mondi wrote:
> > Hello,
> > now that CEU has been picked up for inclusion in v4.17, we can start moving
> > users of old sh_mobile_ceu_camera driver to use the newly introduced one.
> >
> > Migo-R has been first, now it's SH7724 ECOVEC board turn.
> >
> > ECOVEC has a camera board with two MT9T112 image sensor and one TW9910 video
> > decoder input. This series moves the mt9t112 driver away from soc_camera
> > framework and remove dependencies on it in mach-ecovec board code.
> >
> > As per Migo-R, memory for CEU is reserved using memblocks APIs and declared
> > as DMA-capable in board code, power up/down routines have been removed from
> > board code, and GPIOs lookup table registered for sensor drivers.
> >
> > As in the previous series, still no code has been removed or changed in
> > drivers/media/i2c/soc_camera/ until we do not remove all dependencies on it
> > in all board files.
> >
> > Hans, since you asked me to add frame rate interval support for ov772x I expect
> > to receive the same request for mt9t112. Unfortunately I do not have access to
> > register level documentation, nor can perform any testing as I don't have the
> > camera modules. For the same reason I cannot run any v4l2-compliance test on
> > that driver, but just make sure the ECOVEC boots cleanly with the new board
> > file. I'm in favour of moving the driver to staging if you think that's the case.
> >
> > Series based on media-tree master, and as per Migo-R I would ask SH arch/
> > changes to go through media tree as SH maintainers are un-responsive.
>
> When compiling this series I get this error:
>
> drivers/media/i2c/soc_camera/mt9t112.c: In function ‘mt9t112_init_pll’:
> drivers/media/i2c/soc_camera/mt9t112.c:426:16: error: dereferencing pointer to incomplete type ‘struct mt9t112_camera_info’
> priv->info->divider.m,
> ^~
>
> Can you take a look?

Ups, changing the driver interface ofc breaks the soc_camera version
of the driver (I didn't notice as I've compiled soc_camera out in my
tests).

As the old driver is the only user of that interface this series
doesn't touch[1] I'll rename the old 'struct mt9t112_camera_info' to
the newly introduced 'struct mt9t112_platform_data' (and I've made
sure nobody uses the flag definitions I have removed).

I'll pile another patch on top of the one just sent to add the TODO
note at driver's beginning.

Sorry about that
j

[1]
$git grep "media/i2c/mt9t112.h" .
MAINTAINERS:F: include/media/i2c/mt9t112.h
arch/sh/boards/mach-ecovec24/setup.c:#include <media/i2c/mt9t112.h>
drivers/media/i2c/mt9t112.c:#include <media/i2c/mt9t112.h>
drivers/media/i2c/soc_camera/mt9t112.c:#include <media/i2c/mt9t112.h>

>
> Regards,
>
> Hans
>
> >
> > Thanks
> > j
> >
> > Jacopo Mondi (5):
> > media: i2c: Copy mt9t112 soc_camera sensor driver
> > media: i2c: mt9t112: Remove soc_camera dependencies
> > media: i2c: mt9t112: Fix code style issues
> > arch: sh: ecovec: Use new renesas-ceu camera driver
> > media: MAINTAINERS: Add entry for Aptina MT9T112
> >
> > MAINTAINERS | 7 +
> > arch/sh/boards/mach-ecovec24/setup.c | 338 +++++-----
> > arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 4 +-
> > drivers/media/i2c/Kconfig | 11 +
> > drivers/media/i2c/Makefile | 1 +
> > drivers/media/i2c/mt9t112.c | 1136 ++++++++++++++++++++++++++++++++
> > include/media/i2c/mt9t112.h | 17 +-
> > 7 files changed, 1333 insertions(+), 181 deletions(-)
> > create mode 100644 drivers/media/i2c/mt9t112.c
> >
> > --
> > 2.7.4
> >
>

\
 
 \ /
  Last update: 2018-03-10 19:40    [W:0.058 / U:0.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site