lkml.org 
[lkml]   [2018]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/10] ARM64: dts: hi6220: Remove "cooling-{min|max}-level" for CPU nodes
Date
The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
a CPU cooling device is found by referring to the cpufreq table instead.

Moreover, the entries are incorrect here as min level is 4 and the max
level is 0.

Remove the unused properties from the CPU nodes.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 2 --
1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 6a180d1926e8..fca8e4ee98e7 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -88,8 +88,6 @@
next-level-cache = <&CLUSTER0_L2>;
clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
- cooling-min-level = <4>;
- cooling-max-level = <0>;
#cooling-cells = <2>; /* min followed by max */
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
dynamic-power-coefficient = <311>;
--
2.15.0.194.g9af6a3dea062
\
 
 \ /
  Last update: 2018-02-09 10:00    [W:0.106 / U:0.980 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site