lkml.org 
[lkml]   [2018]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 12/44] clk: davinci: Add platform information for TI DA850 PSC
Hi Bartosz, all,

On Fri, Feb 9, 2018 at 8:22 AM, Bartosz Golaszewski <brgl@bgdev.pl> wrote:
> 2018-01-08 3:17 GMT+01:00 David Lechner <david@lechnology.com>:
>> This adds platform-specific declarations for the PSC clocks on TI DA850/
>> OMAP-L138/AM18XX SoCs.
>>
>> Signed-off-by: David Lechner <david@lechnology.com>
>> ---
>> drivers/clk/davinci/Makefile | 1 +
>> drivers/clk/davinci/psc-da850.c | 117 ++++++++++++++++++++++++++++++++++++++++
>> include/linux/clk/davinci.h | 1 +
>> 3 files changed, 119 insertions(+)
>> create mode 100644 drivers/clk/davinci/psc-da850.c
>>
>> diff --git a/drivers/clk/davinci/Makefile b/drivers/clk/davinci/Makefile
>> index fb14c8c..aef0390 100644
>> --- a/drivers/clk/davinci/Makefile
>> +++ b/drivers/clk/davinci/Makefile
>> @@ -11,4 +11,5 @@ obj-$(CONFIG_ARCH_DAVINCI_DM646x) += pll-dm646x.o
>>
>> obj-y += psc.o
>> obj-$(CONFIG_ARCH_DAVINCI_DA830) += psc-da830.o
>> +obj-$(CONFIG_ARCH_DAVINCI_DA850) += psc-da850.o
>> endif
>> diff --git a/drivers/clk/davinci/psc-da850.c b/drivers/clk/davinci/psc-da850.c
>> new file mode 100644
>> index 0000000..3b4583d
>> --- /dev/null
>> +++ b/drivers/clk/davinci/psc-da850.c
>> @@ -0,0 +1,117 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * PSC clock descriptions for TI DA850/OMAP-L138/AM18XX
>> + *
>> + * Copyright (C) 2017 David Lechner <david@lechnology.com>
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/clkdev.h>
>> +#include <linux/init.h>
>> +#include <linux/of.h>
>> +#include <linux/types.h>
>> +
>> +#include "psc.h"
>> +
>> +static const struct davinci_psc_clk_info da850_psc0_info[] __initconst = {
>> + LPSC(0, 0, tpcc0, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
>> + LPSC(1, 0, tptc0, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
>> + LPSC(2, 0, tptc1, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
>> + LPSC(3, 0, aemif, pll0_sysclk3, 0),
>> + LPSC(4, 0, spi0, pll0_sysclk2, 0),
>> + LPSC(5, 0, mmcsd0, pll0_sysclk2, 0),
>> + LPSC(6, 0, aintc, pll0_sysclk4, LPSC_ALWAYS_ENABLED),
>> + LPSC(7, 0, arm_rom, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
>> + LPSC(9, 0, uart0, pll0_sysclk2, 0),
>> + LPSC(13, 0, pruss, pll0_sysclk2, 0),
>> + LPSC(14, 0, arm, pll0_sysclk6, LPSC_ALWAYS_ENABLED),
>> + LPSC(15, 1, dsp, pll0_sysclk1, LPSC_FORCE | LPSC_LOCAL_RESET),
>> + { }
>> +};
>> +
>> +static const struct davinci_psc_clk_info da850_psc1_info[] __initconst = {
>> + LPSC(0, 0, tpcc1, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
>> + LPSC(1, 0, usb0, pll0_sysclk2, 0),
>> + LPSC(2, 0, usb1, pll0_sysclk4, 0),
>> + LPSC(3, 0, gpio, pll0_sysclk4, 0),
>> + LPSC(5, 0, emac, pll0_sysclk4, 0),
>> + LPSC(6, 0, emif3, pll0_sysclk5, LPSC_ALWAYS_ENABLED),
>> + LPSC(7, 0, mcasp0, async3, 0),
>> + LPSC(8, 0, sata, pll0_sysclk2, LPSC_FORCE),
>> + LPSC(9, 0, vpif, pll0_sysclk2, 0),
>> + LPSC(10, 0, spi1, async3, 0),
>> + LPSC(11, 0, i2c1, pll0_sysclk4, 0),
>> + LPSC(12, 0, uart1, async3, 0),
>> + LPSC(13, 0, uart2, async3, 0),
>> + LPSC(14, 0, mcbsp0, async3, 0),
>> + LPSC(15, 0, mcbsp1, async3, 0),
>> + LPSC(16, 0, lcdc, pll0_sysclk2, 0),
>> + LPSC(17, 0, ehrpwm, async3, 0),
>> + LPSC(18, 0, mmcsd1, pll0_sysclk2, 0),
>> + LPSC(20, 0, ecap, async3, 0),
>> + LPSC(21, 0, tptc2, pll0_sysclk2, LPSC_ALWAYS_ENABLED),
>> + { }
>> +};
>> +
>> +void __init da850_psc_clk_init(void __iomem *psc0, void __iomem *psc1)
>> +{
>> + struct clk_onecell_data *clk_data;
>> +
>> + clk_data = davinci_psc_register_clocks(psc0, da850_psc0_info, 16);
>> + if (!clk_data)
>> + return;
>> +
>> + clk_register_clkdev(clk_data->clks[3], NULL, "ti-aemif");
>> + clk_register_clkdev(clk_data->clks[3], "aemif", "davinci-nand.0");
>> + clk_register_clkdev(clk_data->clks[4], NULL, "spi_davinci.0");
>> + clk_register_clkdev(clk_data->clks[5], NULL, "da830-mmc.0");
>> + clk_register_clkdev(clk_data->clks[9], NULL, "serial8250.0");
>> + clk_register_clkdev(clk_data->clks[14], "arm", NULL);
>> + clk_register_clkdev(clk_data->clks[15], NULL, "davinci-rproc.0");
>> +
>> + clk_free_onecell_data(clk_data);
>> +
>> + clk_data = davinci_psc_register_clocks(psc1, da850_psc1_info, 32);
>> + if (!clk_data)
>> + return;
>> +
>> + clk_register_clkdev(clk_data->clks[1], "usb20_psc_clk", NULL);
>> + clk_register_clkdev(clk_data->clks[1], NULL, "musb-da8xx");
>> + clk_register_clkdev(clk_data->clks[1], NULL, "cppi41-dmaengine");
>> + clk_register_clkdev(clk_data->clks[2], NULL, "ohci-da8xx");
>> + clk_register_clkdev(clk_data->clks[3], "gpio", NULL);
>> + clk_register_clkdev(clk_data->clks[5], NULL, "davinci_emac.1");
>> + clk_register_clkdev(clk_data->clks[5], "fck", "davinci_mdio.0");
>> + clk_register_clkdev(clk_data->clks[7], NULL, "davinci-mcasp.0");
>> + clk_register_clkdev(clk_data->clks[8], "fck", "ahci_da850");
>> + clk_register_clkdev(clk_data->clks[9], NULL, "vpif");
>> + clk_register_clkdev(clk_data->clks[10], NULL, "spi_davinci.1");
>> + clk_register_clkdev(clk_data->clks[11], NULL, "i2c_davinci.2");
>> + clk_register_clkdev(clk_data->clks[12], NULL, "serial8250.1");
>> + clk_register_clkdev(clk_data->clks[13], NULL, "serial8250.2");
>> + clk_register_clkdev(clk_data->clks[14], NULL, "davinci-mcbsp.0");
>> + clk_register_clkdev(clk_data->clks[15], NULL, "davinci-mcbsp.1");
>> + clk_register_clkdev(clk_data->clks[16], "fck", "da8xx_lcdc.0");
>> + clk_register_clkdev(clk_data->clks[17], "fck", "ehrpwm.0");
>> + clk_register_clkdev(clk_data->clks[17], "fck", "ehrpwm.1");
>> + clk_register_clkdev(clk_data->clks[18], NULL, "da830-mmc.1");
>> + clk_register_clkdev(clk_data->clks[20], "fck", "ecap.0");
>> + clk_register_clkdev(clk_data->clks[20], "fck", "ecap.1");
>> + clk_register_clkdev(clk_data->clks[20], "fck", "ecap.2");
>> +
>> + clk_free_onecell_data(clk_data);
>> +}
>> +
>> +#ifdef CONFIG_OF
>> +static void __init of_da850_psc0_clk_init(struct device_node *node)
>> +{
>> + of_davinci_psc_clk_init(node, da850_psc0_info, 16);
>> +}
>> +CLK_OF_DECLARE(da850_psc0_clk, "ti,da850-psc0", of_da850_psc0_clk_init);
>> +
>> +static void __init of_da850_psc1_clk_init(struct device_node *node)
>> +{
>> + of_davinci_psc_clk_init(node, da850_psc1_info, 32);
>> +}
>> +CLK_OF_DECLARE(da850_psc1_clk, "ti,da850-psc1", of_da850_psc1_clk_init);
>> +#endif
>> diff --git a/include/linux/clk/davinci.h b/include/linux/clk/davinci.h
>> index 3ec8100..3d8bdfa 100644
>> --- a/include/linux/clk/davinci.h
>> +++ b/include/linux/clk/davinci.h
>> @@ -17,5 +17,6 @@ void dm644x_pll_clk_init(void __iomem *pll1, void __iomem *pll2);
>> void dm646x_pll_clk_init(void __iomem *pll1, void __iomem *pll2);
>>
>> void da830_psc_clk_init(void __iomem *psc0, void __iomem *psc1);
>> +void da850_psc_clk_init(void __iomem *psc0, void __iomem *psc1);
>>
>> #endif /* __LINUX_CLK_DAVINCI_H__ */
>> --
>> 2.7.4
>>
>
> Hi David,
>
> I've been working on moving the genpd code from its own driver to the
> psc one. I couldn't get the system to boot though and problems
> happened very early in the boot sequence. I struggled to figure out
> what's happening, but eventually I noticed that psc uses
> CLK_OF_DECLARE() to initialize clocks. The functions registered this
> way are called very early in the boot sequence, way before
> late_initcall() in which the genpd framework is initialized. This of
> course makes it impossible to register genpd at the same time we
> register PSCs.
>
> Mike, Stephen - it would be great if you could confirm, but I believe
> the clock framework now only accepts clock drivers which create real
> platform drivers, in which case this series would need to be modified.

You are correct. All new uses of CLK_OF_DECLARE are met with high
suspicion, and all new drivers should be platform drivers.

There are cases when CLK_OF_DECLARE is necessary (sometimes
temporarily while things are reworked), but it seems this is not the
case for this driver based on your testing of the platform driver
approach. Please use the platform driver approach instead.

Thanks,
Mike

>
> David: FYI I quickly converted the functions in psc-da850.c to actual
> probe callbacks and it worked just fine on a da850-lcdk board.
>
> Best regards,
> Bartosz Golaszewski

\
 
 \ /
  Last update: 2018-02-09 17:49    [W:0.126 / U:5.584 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site