lkml.org 
[lkml]   [2018]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 1/3] net: stmmac: discard disabled flags in interrupt status register
Date
The interrupt status register in both dwmac1000 and dwmac4 ignores
interrupt enable (for dwmac4) / interrupt mask (for dwmac1000).
Therefore, if we want to check only the bits that can actually trigger
an irq, we have to filter the interrupt status register manually.

Commit 0a764db10337 ("stmmac: Discard masked flags in interrupt status
register") fixed this for dwmac1000. Fix the same issue for dwmac4.

Just like commit 0a764db10337 ("stmmac: Discard masked flags in
interrupt status register"), this makes sure that we do not get
spurious link up/link down prints.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index ed222b20fcf1..1e0a7668b752 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -572,10 +572,12 @@ static int dwmac4_irq_status(struct mac_device_info *hw,
struct stmmac_extra_stats *x)
{
void __iomem *ioaddr = hw->pcsr;
- u32 intr_status;
+ u32 intr_status = readl(ioaddr + GMAC_INT_STATUS);
+ u32 intr_enable = readl(ioaddr + GMAC_INT_EN);
int ret = 0;

- intr_status = readl(ioaddr + GMAC_INT_STATUS);
+ /* Discard disabled bits */
+ intr_status &= intr_enable;

/* Not used events (e.g. MMC interrupts) are not handled. */
if ((intr_status & mmc_tx_irq))
--
2.14.2
\
 
 \ /
  Last update: 2018-02-09 17:23    [W:0.064 / U:2.484 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site