lkml.org 
[lkml]   [2018]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/4] powerpc: wii.dts: Add GPIO line names
Date
These are the GPIO line names on a Nintendo Wii, as documented in:
https://wiibrew.org/wiki/Hardware/Hollywood_GPIOs

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---

v2, v3:
- no change
---
arch/powerpc/boot/dts/wii.dts | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/powerpc/boot/dts/wii.dts b/arch/powerpc/boot/dts/wii.dts
index 7235e375919c..07d5e84e98b1 100644
--- a/arch/powerpc/boot/dts/wii.dts
+++ b/arch/powerpc/boot/dts/wii.dts
@@ -178,6 +178,14 @@
gpio-controller;
ngpios = <24>;

+ gpio-line-names =
+ "POWER", "SHUTDOWN", "FAN", "DC_DC",
+ "DI_SPIN", "SLOT_LED", "EJECT_BTN", "SLOT_IN",
+ "SENSOR_BAR", "DO_EJECT", "EEP_CS", "EEP_CLK",
+ "EEP_MOSI", "EEP_MISO", "AVE_SCL", "AVE_SDA",
+ "DEBUG0", "DEBUG1", "DEBUG2", "DEBUG3",
+ "DEBUG4", "DEBUG5", "DEBUG6", "DEBUG7";
+
/*
* This is commented out while a standard binding
* for i2c over gpio is defined.
--
2.15.1
\
 
 \ /
  Last update: 2018-02-09 13:09    [W:0.060 / U:1.704 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site