lkml.org 
[lkml]   [2018]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Input: gpio_keys: Add level trigger support for GPIO keys
Date
On some platforms (such as Spreadtrum platform), the GPIO keys can only
be triggered by level type. So this patch introduces one property to
indicate if the GPIO trigger type is level trigger or edge trigger.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
.../devicetree/bindings/input/gpio-keys.txt | 2 ++
drivers/input/keyboard/gpio_keys.c | 22 +++++++++++++++++++-
include/linux/gpio_keys.h | 1 +
3 files changed, 24 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt
index a949404..e3104bd 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys.txt
@@ -29,6 +29,8 @@ Optional subnode-properties:
- linux,can-disable: Boolean, indicates that button is connected
to dedicated (not shared) interrupt which can be disabled to
suppress events from the button.
+ - gpio-key,level-trigger: Boolean, indicates that button's interrupt
+ type is level trigger. Otherwise it is edge trigger as default.

Example nodes:

diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 87e613d..d3b4bb6 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -385,6 +385,19 @@ static void gpio_keys_gpio_work_func(struct work_struct *work)
struct gpio_button_data *bdata =
container_of(work, struct gpio_button_data, work.work);

+ if (bdata->button->level_trigger) {
+ unsigned int trigger =
+ irq_get_trigger_type(bdata->irq) & ~IRQF_TRIGGER_MASK;
+ int state = gpiod_get_raw_value_cansleep(bdata->gpiod);
+
+ if (state)
+ trigger |= IRQF_TRIGGER_LOW;
+ else
+ trigger |= IRQF_TRIGGER_HIGH;
+
+ irq_set_irq_type(bdata->irq, trigger);
+ }
+
gpio_keys_gpio_report_event(bdata);

if (bdata->button->wakeup)
@@ -566,7 +579,11 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func);

isr = gpio_keys_gpio_isr;
- irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
+ if (button->level_trigger)
+ irqflags = gpiod_is_active_low(bdata->gpiod) ?
+ IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH;
+ else
+ irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;

} else {
if (!button->irq) {
@@ -721,6 +738,9 @@ static void gpio_keys_close(struct input_dev *input)
button->can_disable =
fwnode_property_read_bool(child, "linux,can-disable");

+ button->level_trigger =
+ fwnode_property_read_bool(child, "gpio-key,level-trigger");
+
if (fwnode_property_read_u32(child, "debounce-interval",
&button->debounce_interval))
button->debounce_interval = 5;
diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
index d06bf77..5095645 100644
--- a/include/linux/gpio_keys.h
+++ b/include/linux/gpio_keys.h
@@ -28,6 +28,7 @@ struct gpio_keys_button {
int wakeup;
int debounce_interval;
bool can_disable;
+ bool level_trigger;
int value;
unsigned int irq;
};
--
1.7.9.5
\
 
 \ /
  Last update: 2018-02-09 07:09    [W:0.035 / U:62.548 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site