lkml.org 
[lkml]   [2018]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [linux-sunxi] Re: [PATCH v4] ARM: sun8i: h2+: add support for Banana Pi M2 Zero board
Date
Dne četrtek, 08. februar 2018 ob 10:15:35 CET je Icenowy Zheng napisal(a):
> 在 2018-02-08 17:00,Maxime Ripard 写道:
>
> > On Tue, Feb 06, 2018 at 09:16:47PM +0800, Icenowy Zheng wrote:
> >> Banana Pi M2 Zero board is a H2+-based board by Sinovoip, with a form
> >> factor and GPIO holes similar to Raspberry Pi Zero.
> >>
> >> It features:
> >> - Allwinner H2+ SoC
> >> - Single-chip (16-bit) 512MiB DDR3 DRAM
> >> - Ampak AP6212 Wi-Fi/Bluetooth module
> >> - MicroSD slot
> >> - Two MicroUSB Type-B ports (one can only be used to power the board
> >> and
> >>
> >> the other features OTG functionality)
> >>
> >> - Two keys, a reset and a GPIO-connected key.
> >> - HDMI Type-C (miniHDMI) connector connected to the HDMI part of H2+.
> >> - CSI connector to connect the camera sensor provided by Sinovoip.
> >>
> >> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> >> ---
> >> Changes in v4:
> >> - Use SPDX license identifier.
> >>
> >> Changes in v3:
> >> - Add comments about Vbus problem in &usbphy node.
> >>
> >> Changes in v2:
> >> - Use high active SD card detect on the production batch.
> >>
> >> arch/arm/boot/dts/Makefile | 1 +
> >> .../boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 126
> >>
> >> +++++++++++++++++++++
> >>
> >> 2 files changed, 127 insertions(+)
> >> create mode 100644
> >>
> >> arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> >>
> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> >> index ade7a38543dc..d5a17e6e8b0f 100644
> >> --- a/arch/arm/boot/dts/Makefile
> >> +++ b/arch/arm/boot/dts/Makefile
> >> @@ -974,6 +974,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
> >>
> >> sun8i-a83t-cubietruck-plus.dtb \
> >> sun8i-a83t-tbs-a711.dtb \
> >> sun8i-h2-plus-orangepi-r1.dtb \
> >>
> >> + sun8i-h2-plus-bananapi-m2-zero.dtb \
> >>
> >> sun8i-h2-plus-orangepi-zero.dtb \
> >> sun8i-h3-bananapi-m2-plus.dtb \
> >> sun8i-h3-beelink-x2.dtb \
> >>
> >> diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> >> b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> >> new file mode 100644
> >> index 000000000000..e2ee65a5bf92
> >> --- /dev/null
> >> +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> >> @@ -0,0 +1,126 @@
> >> +/*
> >> + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
> >> + *
> >> + * Based on sun8i-h3-bananapi-m2-plus.dts, which is:
> >> + * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
> >> + *
> >> + * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> >
> > Sorry to be a bit picky about this, but this should be your very first
> > line, see arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts for
> > example.
>
> I think it's also OK here, see
> arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts.

Lincesing rules [1] says it should be in first possible line which can contain
comment.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/
Documentation/process/license-rules.rst#n57

>
> > Thanks!
> > Maxime
>
> --
> You received this message because you are subscribed to the Google Groups
> "linux-sunxi" group. To unsubscribe from this group and stop receiving
> emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.




\
 
 \ /
  Last update: 2018-02-08 10:29    [W:0.023 / U:0.252 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site