lkml.org 
[lkml]   [2018]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/2] net, can, ifi: fix "write buffer full" error
From
Date
On 02/08/2018 08:22 PM, Marek Vasut wrote:
> On 02/08/2018 03:46 PM, Marc Kleine-Budde wrote:
>> On 02/08/2018 07:47 AM, Heiko Schocher wrote:
>>> the driver reads in the ISR first the IRQpending register,
>>> and clears after that in a write *all* bits in it.
>>>
>>> It could happen that the isr register raise bits between
>>> this 2 register accesses, which leads in lost bits ...
>>>
>>> In case it clears "TX message sent successfully", the driver
>>> never sends any Tx data, and buffers to userspace run over.
>>>
>>> Fixed this:
>>> clear only the bits in the IRQpending register, the
>>> driver had read.
>>>
>>> Signed-off-by: Heiko Schocher <hs@denx.de>
>>> Reviewed-by: Marek Vasut <marex@denx.de>
>>
>> Applied both to linux-can.
>
> Can you also apply them to stable, so they get into 4.9.x etc ?

I've already added stable on Cc, so they will be picked up by the stable
maintainers.

Marc

--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-02-08 22:34    [W:0.038 / U:0.384 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site