lkml.org 
[lkml]   [2018]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 1/3] irqchip/gic-v3-its: add ability to save/restore ITS state
Hi Derek,

On Wed, Feb 07, 2018 at 06:36:46PM -0800, Derek Basehore wrote:
> Some platforms power off GIC logic in suspend, so we need to
> save/restore state. The distributor and redistributor registers need
> to be handled in platform code due to access permissions on those
> registers, but the ITS registers can be restored in the kernel.
>
> Signed-off-by: Derek Basehore <dbasehore@chromium.org>
> ---
> drivers/irqchip/irq-gic-v3-its.c | 103 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 103 insertions(+)
>
> diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
> index 06f025fd5726..35ad48f51dfa 100644
> --- a/drivers/irqchip/irq-gic-v3-its.c
> +++ b/drivers/irqchip/irq-gic-v3-its.c
> @@ -33,6 +33,7 @@
> #include <linux/of_platform.h>
> #include <linux/percpu.h>
> #include <linux/slab.h>
> +#include <linux/syscore_ops.h>
>
> #include <linux/irqchip.h>
> #include <linux/irqchip/arm-gic-v3.h>
> @@ -46,6 +47,7 @@
> #define ITS_FLAGS_CMDQ_NEEDS_FLUSHING (1ULL << 0)
> #define ITS_FLAGS_WORKAROUND_CAVIUM_22375 (1ULL << 1)
> #define ITS_FLAGS_WORKAROUND_CAVIUM_23144 (1ULL << 2)
> +#define ITS_FLAGS_SAVE_SUSPEND_STATE (1ULL << 3)
>
> #define RDIST_FLAGS_PROPBASE_NEEDS_FLUSHING (1 << 0)
>
> @@ -101,6 +103,8 @@ struct its_node {
> struct its_collection *collections;
> struct fwnode_handle *fwnode_handle;
> u64 (*get_msi_base)(struct its_device *its_dev);
> + u64 cbaser_save;
> + u32 ctlr_save;
> struct list_head its_device_list;
> u64 flags;
> unsigned long list_nr;
> @@ -3042,6 +3046,100 @@ static void its_enable_quirks(struct its_node *its)
> gic_enable_quirks(iidr, its_quirks, its);
> }
>
> +static int its_save_disable(void)
> +{
> + struct its_node *its;
> + int err = 0;
> +
> + spin_lock(&its_lock);
> + list_for_each_entry(its, &its_nodes, entry) {
> + void __iomem *base;
> +
> + if (!(its->flags & ITS_FLAGS_SAVE_SUSPEND_STATE))
> + continue;
> +
> + base = its->base;
> + its->ctlr_save = readl_relaxed(base + GITS_CTLR);
> + err = its_force_quiescent(base);
> + if (err) {
> + pr_err("ITS failed to quiesce\n");

Isn't this a case where it was suggested to print the PA? Also, printing
the error code never hurts. Like:

pr_err("ITS@%pa: failed to quiesce: %d\n",
&its->phys_base, err);

> + writel_relaxed(its->ctlr_save, base + GITS_CTLR);
> + goto err;
> + }
> +
> + its->cbaser_save = gits_read_cbaser(base + GITS_CBASER);
> + }
> +
> +err:
> + if (err) {
> + list_for_each_entry_continue_reverse(its, &its_nodes, entry) {
> + void __iomem *base;
> +
> + if (!(its->flags & ITS_FLAGS_SAVE_SUSPEND_STATE))
> + continue;
> +
> + base = its->base;
> + writel_relaxed(its->ctlr_save, base + GITS_CTLR);
> + }
> + }
> + spin_unlock(&its_lock);
> +
> + return err;
> +}
> +
> +static void its_restore_enable(void)
> +{
> + struct its_node *its;
> +
> + spin_lock(&its_lock);
> + list_for_each_entry(its, &its_nodes, entry) {
> + void __iomem *base;
> + int i;
> +
> + if (!(its->flags & ITS_FLAGS_SAVE_SUSPEND_STATE))
> + continue;
> +
> + base = its->base;
> +
> + /*
> + * Make sure that the ITS is disabled. If it fails to quiesce,
> + * don't restore it since writing to CBASER or BASER<n>
> + * registers is undefined according to the GIC v3 ITS
> + * Specification.
> + */
> + if (its_force_quiescent(base)) {
> + pr_err("ITS(%p): failed to quiesce on resume\n", base);

I think Marc was requesting the PA, not the VA. The VA isn't really very
useful. Also, might as well log with similar style to the existing logs
(ITS@xxx), and log the error code:

pr_err("ITS@%pa: failed to quiesce on resume: %d\n",
&its->phys_base, ret);

Brian

> + continue;
> + }
> +
> + gits_write_cbaser(its->cbaser_save, base + GITS_CBASER);
> +
> + /*
> + * Writing CBASER resets CREADR to 0, so make CWRITER and
> + * cmd_write line up with it.
> + */
> + its->cmd_write = its->cmd_base;
> + gits_write_cwriter(0, base + GITS_CWRITER);
> +
> + /* Restore GITS_BASER from the value cache. */
> + for (i = 0; i < GITS_BASER_NR_REGS; i++) {
> + struct its_baser *baser = &its->tables[i];
> +
> + if (!(baser->val & GITS_BASER_VALID))
> + continue;
> +
> + its_write_baser(its, baser, baser->val);
> + }
> + writel_relaxed(its->ctlr_save, base + GITS_CTLR);
> + }
> + spin_unlock(&its_lock);
> +}
> +
> +static struct syscore_ops its_syscore_ops = {
> + .suspend = its_save_disable,
> + .resume = its_restore_enable,
> +};
> +
> static int its_init_domain(struct fwnode_handle *handle, struct its_node *its)
> {
> struct irq_domain *inner_domain;
> @@ -3261,6 +3359,9 @@ static int __init its_probe_one(struct resource *res,
> ctlr |= GITS_CTLR_ImDe;
> writel_relaxed(ctlr, its->base + GITS_CTLR);
>
> + if (fwnode_property_present(handle, "reset-on-suspend"))
> + its->flags |= ITS_FLAGS_SAVE_SUSPEND_STATE;
> +
> err = its_init_domain(handle, its);
> if (err)
> goto out_free_tables;
> @@ -3515,5 +3616,7 @@ int __init its_init(struct fwnode_handle *handle, struct rdists *rdists,
> }
> }
>
> + register_syscore_ops(&its_syscore_ops);
> +
> return 0;
> }
> --
> 2.16.0.rc1.238.g530d649a79-goog
>

\
 
 \ /
  Last update: 2018-02-08 18:56    [W:0.067 / U:1.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site