lkml.org 
[lkml]   [2018]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/2] dt-bindings/display/panel: Add support for Raydium rm68200 dsi panel
Date
The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280
TFT LCD panel connected using a MIPI-DSI video interface.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
---
.../bindings/display/panel/raydium,rm68200.txt | 25 ++++++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt

diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt
new file mode 100644
index 000000000000..cbb79ef3bfc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.txt
@@ -0,0 +1,25 @@
+Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel
+
+The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
+panel connected using a MIPI-DSI video interface.
+
+Required properties:
+ - compatible: "raydium,rm68200"
+ - reg: the virtual channel number of a DSI peripheral
+
+Optional properties:
+ - reset-gpios: a GPIO spec for the reset pin (active low).
+ - power-supply: phandle of the regulator that provides the supply voltage.
+ - backlight: phandle of the backlight device attached to the panel.
+
+Example:
+&dsi {
+ ...
+ panel@0 {
+ compatible = "raydium,rm68200";
+ reg = <0>;
+ reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
+ power-supply = <&v1v8>;
+ backlight = <&pwm_backlight>;
+ };
+};
--
2.15.1
\
 
 \ /
  Last update: 2018-02-08 15:32    [W:0.095 / U:3.164 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site