lkml.org 
[lkml]   [2018]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH v2 8/9] arm64: dts: uniphier: add speaker out for UniPhier LD11/LD20 boards
Date
This patch adds codec node for TI TAS571x on UniPhier LD11/20
global boards. And adds settings of AIO for speaker out.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
---
.../boot/dts/socionext/uniphier-ld11-global.dts | 20 ++++++++++++++++++++
.../boot/dts/socionext/uniphier-ld20-global.dts | 20 ++++++++++++++++++++
2 files changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
index 4eb8d00a8c02..ca09251a3eab 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
@@ -10,6 +10,7 @@

/dts-v1/;
#include "uniphier-ld11.dtsi"
+#include "dt-bindings/gpio/uniphier-gpio.h"

/ {
model = "UniPhier LD11 Global Board (REF_LD11_GP)";
@@ -45,6 +46,7 @@
widgets = "Headphone", "Headphone Jack";

dais = <&i2s_port2
+ &i2s_port3
&i2s_port4
&spdif_port0>;
};
@@ -73,6 +75,20 @@
&i2c0 {
status = "okay";

+ tas5707a@1d {
+ compatible = "ti,tas5711";
+ reg = <0x1d>;
+ reset-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 4) GPIO_ACTIVE_LOW>;
+ pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 5) GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+
+ port@0 {
+ tas_speaker: endpoint {
+ remote-endpoint = <&i2s_hpcmout1>;
+ };
+ };
+ };
+
eeprom@50 {
compatible = "st,24c64", "atmel,24c64";
reg = <0x50>;
@@ -109,17 +125,21 @@

i2s_port2: port@2 {
i2s_line: endpoint {
+ dai-format = "i2s";
remote-endpoint = <&evea_line>;
};
};

i2s_port3: port@3 {
i2s_hpcmout1: endpoint {
+ dai-format = "i2s";
+ remote-endpoint = <&tas_speaker>;
};
};

i2s_port4: port@4 {
i2s_pcmout3: endpoint {
+ dai-format = "i2s";
remote-endpoint = <&evea_hp>;
};
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
index ebcd65631bca..0728832ce552 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
@@ -10,6 +10,7 @@

/dts-v1/;
#include "uniphier-ld20.dtsi"
+#include "dt-bindings/gpio/uniphier-gpio.h"

/ {
model = "UniPhier LD20 Global Board (REF_LD20_GP)";
@@ -45,6 +46,7 @@
widgets = "Headphone", "Headphone Jack";

dais = <&i2s_port2
+ &i2s_port3
&i2s_port4
&spdif_port0>;
};
@@ -72,6 +74,20 @@

&i2c0 {
status = "okay";
+
+ tas5707@1b {
+ compatible = "ti,tas5711";
+ reg = <0x1b>;
+ reset-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 0) GPIO_ACTIVE_LOW>;
+ pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 1) GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+
+ port@0 {
+ tas_speaker: endpoint {
+ remote-endpoint = <&i2s_hpcmout1>;
+ };
+ };
+ };
};

&nand {
@@ -91,17 +107,21 @@

i2s_port2: port@2 {
i2s_line: endpoint {
+ dai-format = "i2s";
remote-endpoint = <&evea_line>;
};
};

i2s_port3: port@3 {
i2s_hpcmout1: endpoint {
+ dai-format = "i2s";
+ remote-endpoint = <&tas_speaker>;
};
};

i2s_port4: port@4 {
i2s_pcmout3: endpoint {
+ dai-format = "i2s";
remote-endpoint = <&evea_hp>;
};
};
--
2.15.0
\
 
 \ /
  Last update: 2018-02-07 10:12    [W:0.060 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site