lkml.org 
[lkml]   [2018]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 04/12] parport: Add support for BrainBoxes PX272/PX306 MIO card
Date
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This adds support for BrainBoxes Multi I/O cards (4+1 serial + 1 parallel port):

02:00.0 0702: 135a:4100 (rev 02)
Subsystem: 135a:0443
Flags: fast devsel, IRQ 18
Memory at f7d02000 (32-bit, non-prefetchable) [size=128]
I/O ports at e000 [size=128]
I/O ports at e080 [size=64]
I/O ports at e0c0 [size=16]
Memory at f7d01000 (32-bit, non-prefetchable) [size=128]
Memory at f7d00000 (32-bit, non-prefetchable) [size=128]
Capabilities: [50] MSI: Enable- Count=1/4 Maskable- 64bit+
Capabilities: [78] Power Management version 3
Capabilities: [80] Express Legacy Endpoint, MSI 01
Capabilities: [100] Virtual Channel
Capabilities: [800] Advanced Error Reporting

Reported-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Tested-by: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
---
drivers/parport/parport_serial.c | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index e15b484..53a3eae 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -65,6 +65,7 @@ enum parport_pc_pci_cards {
wch_ch353_1s1p,
wch_ch353_2s1p,
wch_ch382_2s1p,
+ brainboxes_5s1p,
sunix_2s1p,
};

@@ -153,6 +154,7 @@ static struct parport_pc_pci cards[] = {
/* wch_ch353_1s1p*/ { 1, { { 1, -1}, } },
/* wch_ch353_2s1p*/ { 1, { { 2, -1}, } },
/* wch_ch382_2s1p*/ { 1, { { 2, -1}, } },
+ /* brainboxes_5s1p */ { 1, { { 3, -1 }, } },
/* sunix_2s1p */ { 1, { { 3, -1 }, } },
};

@@ -261,6 +263,10 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
{ 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
{ 0x1c00, 0x3250, 0x1c00, 0x3250, 0, 0, wch_ch382_2s1p},

+ /* BrainBoxes PX272/PX306 MIO card */
+ { PCI_VENDOR_ID_INTASHIELD, 0x4100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_5s1p },
+
/*
* More SUNIX variations. At least one of these has part number
* '5079A but subdevice 0x102. That board reports 0x0708 as
@@ -504,6 +510,12 @@ static struct pciserial_board pci_parport_serial_boards[] = {
.uart_offset = 8,
.first_offset = 0xC0,
},
+ [brainboxes_5s1p] = {
+ .flags = FL_BASE2,
+ .num_ports = 5,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
[sunix_2s1p] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 2,
--
2.7.4
\
 
 \ /
  Last update: 2018-02-07 20:51    [W:0.069 / U:0.280 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site