lkml.org 
[lkml]   [2018]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/7] ARM: davinci: add genpd support
Date
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Hi Sekhar et al,

please take a look at the following patches. They add a simple genpd
driver and use it in DT mode on da850 boards.

I was trying to use genpd in legacy mode too, but couldn't find neither
any interfaces nor users that would do that. For now I added a check in
arch/arm/mach-davinci/pm_domain.c that disables the clock pm setup if
we're using genpd.

This series applies on top of and has been tested with David Lechner's
for-bartosz branch. It fixes the clock look-up issues we faced with
lcdc and emac.

Bartosz Golaszewski (7):
dt-bindings: soc: new driver for DaVinci genpd
soc: davinci: new genpd driver
ARM: davinci: don't setup pm_clk if we're using genpd
ARM: dts: da850: add power controller nodes
ARM: dts: da850: add power-domains properties to device nodes
ARM: davinci: select generic power domains for DaVinci in DT mode
ARM: davinci_all_defconfig: select the DaVinci genpd driver in DT mode

.../bindings/soc/ti,davinci-pm-domains.txt | 13 +++
arch/arm/boot/dts/da850.dtsi | 46 ++++++++
arch/arm/configs/davinci_all_defconfig | 2 +
arch/arm/mach-davinci/Kconfig | 1 +
arch/arm/mach-davinci/pm_domain.c | 9 +-
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/davinci/Kconfig | 16 +++
drivers/soc/davinci/Makefile | 1 +
drivers/soc/davinci/davinci_pm_domains.c | 125 +++++++++++++++++++++
10 files changed, 214 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/soc/ti,davinci-pm-domains.txt
create mode 100644 drivers/soc/davinci/Kconfig
create mode 100644 drivers/soc/davinci/Makefile
create mode 100644 drivers/soc/davinci/davinci_pm_domains.c

--
2.16.1

\
 
 \ /
  Last update: 2018-02-07 14:49    [W:0.119 / U:14.276 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site