lkml.org 
[lkml]   [2018]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] Input: matrix_keypad - fix keypad does not response
From
Date
On Sat, 2018-02-03 at 11:35 -0800, Dmitry Torokhov wrote:
Hi Dmitry Torokhov
> > If matrix_keypad_stop() is calling and the keypad interrupt is
> > triggered,
> > disable_row_irqs() is called by both matrix_keypad_interrupt() and
> > matrix_keypad_stop() at the same time. then disable_row_irqs() is
> > called
> > twice, and the device enter suspend state before keypad->work is
> > executed.
> > At this condition the device will start keypad and enable irq once
> > after
> > resume. and then irqs are disabled yet because irqs are disabled
> > twice and
> > only enable once.
> >
> > Take lock around keypad->stopped and queue delayed work in
> > matrix_keypad_start() and matrix_keypad_stop() to ensure irqs
> > operation and
> > scheduling scan work are in atomic operation.
> >
> > Signed-off-by: Zhang Bo <zbsdta@126.com>
> > ---
> > Changes in v2:
> > - Change commit message and full name in the signed-off-by tag.
> >
> > drivers/input/keyboard/matrix_keypad.c | 18 ++++++++++++------
> > 1 file changed, 12 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/input/keyboard/matrix_keypad.c
> > b/drivers/input/keyboard/matrix_keypad.c
> > index 1f316d66e6f7..13fe51824637 100644
> > --- a/drivers/input/keyboard/matrix_keypad.c
> > +++ b/drivers/input/keyboard/matrix_keypad.c
> > @@ -169,7 +169,8 @@ static void matrix_keypad_scan(struct
> > work_struct *work)
> > /* Enable IRQs again */
> > spin_lock_irq(&keypad->lock);
> > keypad->scan_pending = false;
> > - enable_row_irqs(keypad);
> > + if (keypad->stopped == false)
> > + enable_row_irqs(keypad);
> > spin_unlock_irq(&keypad->lock);
> > }
> >
> > @@ -202,14 +203,16 @@ static int matrix_keypad_start(struct
> > input_dev *dev)
> > {
> > struct matrix_keypad *keypad = input_get_drvdata(dev);
> >
> > + spin_lock_irq(&keypad->lock);
> > keypad->stopped = false;
> > - mb();
> >
> > /*
> > * Schedule an immediate key scan to capture current key
> > state;
> > * columns will be activated and IRQs be enabled after the
> > scan.
> > */
> > - schedule_delayed_work(&keypad->work, 0);
> > + if (keypad->scan_pending == false)
>
> How can we have the pending scan if the keypad was disabled.
>
> > + schedule_delayed_work(&keypad->work, 0);
> > + spin_unlock_irq(&keypad->lock);
>
> I do not think the change to matrix_keypad_start() is needed. If
> device
> is quiesced we do not have issue of ISR racing with us here.
>
you are right, irqs are disabled and worker is finished in
matrix_keypad_stop(), so
there is no pending scaning and the if condition here and lock are not
needed.
> >
> > return 0;
> > }
> > @@ -218,14 +221,17 @@ static void matrix_keypad_stop(struct
> > input_dev *dev)
> > {
> > struct matrix_keypad *keypad = input_get_drvdata(dev);
> >
> > + spin_lock_irq(&keypad->lock);
> > keypad->stopped = true;
> > - mb();
> > - flush_work(&keypad->work.work);
> > /*
> > * matrix_keypad_scan() will leave IRQs enabled;
> > * we should disable them now.
> > */
> > - disable_row_irqs(keypad);
> > + if (keypad->scan_pending == false)
> > + disable_row_irqs(keypad);
> > + spin_unlock_irq(&keypad->lock);
> > +
> > + flush_work(&keypad->work.work);
>
> This is wrong, you should not have moved the flush_work() here. The
> logic is as follows:
>
> - set the "stopped" flag
> - ensure that ISR has completed
> - ensure that work item has finished (by doing flush_work()) - this
> will
> make sure that interrupts are enabled (either ISR noticed "stopped
> flag" and did not touch them, or ISR scheduled work and work item
> re-enabled them)
> - finally disable IRQs
>
> Your change breaks this.
>
> As far as I can see, the only change that is needed is this at the
> beginning of matrix_keypad_stop():
>
> spin_lock_irq(&keypad->lock);
> keypad->stopped = true;
> spin_unlock_irq(&keypad->lock);
>
> Thanks.
>
yes, only protecting keypad->stopped ensures irqs are disabled only
once.

\
 
 \ /
  Last update: 2018-02-04 00:58    [W:0.105 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site