lkml.org 
[lkml]   [2018]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 4/4] pintcrl: support bias-disable of generic and special pins simultaneously
From
Date
On Mon, 2018-02-26 at 16:34 +0800, Zhiyong Tao wrote:
> For generic pins, parameter "arg" is 0 or 1.
> For special pins, bias-disable is set by R0R1,
> so we need transmited "00" to set bias-disable
> When we set "bias-disable" as high-z property,
> the parameter should be "MTK_PUPD_SET_R1R0_00".
>
> Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
> ---
> drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 13 +++++++++++--
> 1 file changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> index 3cf384f..e88ba04 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> @@ -301,8 +301,17 @@ static int mtk_pconf_set_pull_select(struct mtk_pinctrl *pctl,
> * resistor bit, so we need this special handle.
> */
> if (pctl->devdata->spec_pull_set) {
> - ret = pctl->devdata->spec_pull_set(mtk_get_regmap(pctl, pin),
> - pin, pctl->devdata->port_align, isup, arg);
> + if (enable) {
> + ret = pctl->devdata->spec_pull_set(
> + mtk_get_regmap(pctl, pin), pin,
> + pctl->devdata->port_align, isup,
> + arg);
> + } else {
> + ret = pctl->devdata->spec_pull_set(
> + mtk_get_regmap(pctl, pin), pin,
> + pctl->devdata->port_align, isup,
> + MTK_PUPD_SET_R1R0_00);
> + }


it looks like you can use as following snippet with reusing original
logic and less effort on maintaining these common code (?)


if (pctl->devdata->spec_pull_set) {
+ if (!enable)
+ arg = MTK_PUPD_SET_R1R0_00;

ret = pctl->devdata->spec_pull_set(mtk_get_regmap(pctl, pin),
pin, pctl->devdata->port_align, isup, arg);


Also, it's better to add more comments to such kind of special path for
allowing future SoCs to follow and extend more easily.

> if (!ret)
> return 0;
> }


\
 
 \ /
  Last update: 2018-02-28 08:34    [W:0.083 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site