lkml.org 
[lkml]   [2018]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] ARM: dts: sun8i: a83t: add cpu0 and cpu100 labels
Date
The Allwinner A83T is a SoC with two clusters of 4 A7, each cluster
having its own regulator and clock.

The regulators are board-specific, thus we need labels for cpu0 and
cpu100 so that we can use references to these nodes from the board
header file.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 46ae4fa..016d22f 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -60,7 +60,7 @@
#address-cells = <1>;
#size-cells = <0>;

- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
@@ -84,7 +84,7 @@
reg = <3>;
};

- cpu@100 {
+ cpu100: cpu@100 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0x100>;
--
git-series 0.9.1
\
 
 \ /
  Last update: 2018-02-28 14:13    [W:0.996 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site