lkml.org 
[lkml]   [2018]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] dt-bindings: Add a binding for the sunxi message box
Date
This mailbox hardware is present in several Allwinner sun8i and sun50i
SoCs. Add a device tree binding for it.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
.../devicetree/bindings/mailbox/sunxi-msgbox.txt | 40 ++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/sunxi-msgbox.txt

diff --git a/Documentation/devicetree/bindings/mailbox/sunxi-msgbox.txt b/Documentation/devicetree/bindings/mailbox/sunxi-msgbox.txt
new file mode 100644
index 000000000000..3b3ed7f870a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/sunxi-msgbox.txt
@@ -0,0 +1,40 @@
+Allwinner sunxi Message Box
+===========================
+
+The hardware message box on sunxi SoCs is a two-user mailbox controller
+containing 8 unidirectional FIFOs bonded into 4 bidirectional mailbox channels.
+An interrupt is raised for received messages, but software must poll to know
+when a transmitted message has been acknowledged by the remote user.
+
+Refer to ./mailbox.txt for generic information about mailbox device-tree
+bindings.
+
+Mailbox Device Node:
+====================
+
+Required properties:
+--------------------
+- compatible: Must be "allwinner,sunxi-msgbox".
+- reg: Contains the mailbox register address range (base
+ address and length).
+- clocks: phandle for the clock controller and specifier.
+- clock-names: Must be "bus".
+- resets: phandle for the reset controller and specifier.
+- reset-names: Must be "bus".
+- interrupts: Contains interrupt information for the mailbox.
+- #mbox-cells Must be 2 - the indexes of the transmit and receive
+ channels, respectively.
+
+Example:
+--------
+
+ msgbox: mailbox@1c17000 {
+ compatible = "allwinner,sunxi-msgbox";
+ reg = <0x01c17000 0x1000>;
+ clocks = <&ccu CLK_BUS_MSGBOX>;
+ clock-names = "bus";
+ resets = <&ccu RST_BUS_MSGBOX>;
+ reset-names = "bus";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ };
--
2.13.6
\
 
 \ /
  Last update: 2018-02-28 03:28    [W:0.159 / U:1.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site