lkml.org 
[lkml]   [2018]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[RESEND PATCH 2/3] pwm: stm32: LPTimer: use 3 cells xlate
    Date
    From: Gerald Baeza <gerald.baeza@st.com>

    STM32 Low-Power Timer supports generic 3 cells pwm to encode
    PWM number, period and polarity.

    Signed-off-by: Gerald Baeza <gerald.baeza@st.com>
    Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
    ---
    drivers/pwm/pwm-stm32-lp.c | 2 ++
    1 file changed, 2 insertions(+)

    diff --git a/drivers/pwm/pwm-stm32-lp.c b/drivers/pwm/pwm-stm32-lp.c
    index 1ac9e43..346b7bd 100644
    --- a/drivers/pwm/pwm-stm32-lp.c
    +++ b/drivers/pwm/pwm-stm32-lp.c
    @@ -203,6 +203,8 @@ static int stm32_pwm_lp_probe(struct platform_device *pdev)
    priv->chip.dev = &pdev->dev;
    priv->chip.ops = &stm32_pwm_lp_ops;
    priv->chip.npwm = 1;
    + priv->chip.of_xlate = of_pwm_xlate_with_flags;
    + priv->chip.of_pwm_n_cells = 3;

    ret = pwmchip_add(&priv->chip);
    if (ret < 0)
    --
    1.9.1
    \
     
     \ /
      Last update: 2018-02-23 14:38    [W:2.787 / U:0.272 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site