lkml.org 
[lkml]   [2018]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 08/16] iio: adc: sun4i-gpadc-iio: rework: add interrupt support
From
Date


On 31.01.2018 20:07, Quentin Schulz wrote:
> Hi Philipp,
>
> On Mon, Jan 29, 2018 at 12:29:11AM +0100, Philipp Rossak wrote:
>> This patch rewors the driver to support interrupts for the thermal part
>> of the sensor.
>>
>> This is only available for the newer sensor (currently H3 and A83T).
>> The interrupt will be trigerd on data available and triggers the update
>> for the thermal sensors. All newer sensors have different amount of
>> sensors and different interrupts for each device the reset of the
>> interrupts need to be done different
>>
>> For the newer sensors is the autosuspend disabled.
>>
>> Signed-off-by: Philipp Rossak <embed3d@gmail.com>
>> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
>> ---
>> drivers/iio/adc/sun4i-gpadc-iio.c | 60 +++++++++++++++++++++++++++++++++++----
>> include/linux/mfd/sun4i-gpadc.h | 2 ++
>> 2 files changed, 56 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
>> index 74eeb5cd5218..b7b5451226b0 100644
>> --- a/drivers/iio/adc/sun4i-gpadc-iio.c
>> +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
>> @@ -71,11 +71,14 @@ struct gpadc_data {
>> unsigned int temp_data[MAX_SENSOR_COUNT];
>> int (*sample_start)(struct sun4i_gpadc_iio *info);
>> int (*sample_end)(struct sun4i_gpadc_iio *info);
>> + u32 irq_clear_map;
>> + u32 irq_control_map;
>
> I would say to use a regmap_irq_chip for controlling IRQs.
>
Sounds good for me! I will rework that in the next version.
>> bool has_bus_clk;
>> bool has_bus_rst;
>> bool has_mod_clk;
>> int sensor_count;
>> bool supports_nvmem;
>> + bool support_irq;
>> };
>>
>> static const struct gpadc_data sun4i_gpadc_data = {
>> @@ -90,6 +93,7 @@ static const struct gpadc_data sun4i_gpadc_data = {
>> .sample_end = sun4i_gpadc_sample_end,
>> .sensor_count = 1,
>> .supports_nvmem = false,
>> + .support_irq = false,
>
> False is the default, no need to set support_irq.
>
> [...]
>
>> struct sun4i_gpadc_iio {
>> @@ -332,6 +339,11 @@ static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val,
>> return 0;
>> }
>>
>> + if (info->data->support_irq) {
>> + regmap_read(info->regmap, info->data->temp_data[sensor], val);
>> + return 0;
>> + }
>> +
>
> Maybe you could define a new thermal_zone_of_device_ops for these new
> thermal sensors? That way, you don't even need the boolean support_irq.
>
Sounds good for me! I will rework that in the next version.

>> return sun4i_gpadc_read(indio_dev, 0, val, info->temp_data_irq);
>> }
>>
>> @@ -429,6 +441,17 @@ static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int irq, void *dev_id)
>> return IRQ_HANDLED;
>> }
>>
>> +static irqreturn_t sunxi_irq_thread(int irq, void *data)
>
> I think we're trying to avoid sunxi mentions but rather using the name
> of the first IP (in term of product release, not support) using this
> function.
>
>> +{
>> + struct sun4i_gpadc_iio *info = data;
>> +
>> + regmap_write(info->regmap, SUN8I_H3_THS_STAT, info->data->irq_clear_map);
>> +
>
> Will be handled by regmap_irq_chip.
> [...]
>> - info->no_irq = true;
>> + if (info->data->support_irq) {
>> + /* only the new versions of ths support right now irqs */
>> + irq = platform_get_irq(pdev, 0);
>> + if (irq < 0) {
>> + dev_err(&pdev->dev, "failed to get IRQ: %d\n", irq);
>> + return irq;
>> + }
>> +
>> + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
>> + sunxi_irq_thread, IRQF_ONESHOT,
>> + dev_name(&pdev->dev), info);
>> + if (ret)
>> + return ret;
>> +
>> + } else
>> + info->no_irq = true;
>> +
>
> That's a bit funny to have two booleans named no_irq and support_irq :)
>
I know this looks very funny. I thought this would be better to keep, to
_not_ break anything. Since I will rework the whole driver and integrate
the mfd part I hope I can remove both.

>> indio_dev->num_channels = ARRAY_SIZE(sun8i_a33_gpadc_channels);
>> indio_dev->channels = sun8i_a33_gpadc_channels;
>>
>> @@ -789,11 +829,13 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
>> if (ret)
>> return ret;
>>
>> - pm_runtime_set_autosuspend_delay(&pdev->dev,
>> - SUN4I_GPADC_AUTOSUSPEND_DELAY);
>> - pm_runtime_use_autosuspend(&pdev->dev);
>> - pm_runtime_set_suspended(&pdev->dev);
>> - pm_runtime_enable(&pdev->dev);
>> + if (!info->data->support_irq) {
>> + pm_runtime_set_autosuspend_delay(&pdev->dev,
>> + SUN4I_GPADC_AUTOSUSPEND_DELAY);
>> + pm_runtime_use_autosuspend(&pdev->dev);
>> + pm_runtime_set_suspended(&pdev->dev);
>> + pm_runtime_enable(&pdev->dev);
>> + }
>
> Why would you not want your IP to do runtime PM?

I will enable this again, in the next version! I had some issues with
this, thus I disabled this, but I know now what I did wrong!

Thanks,
Philipp

\
 
 \ /
  Last update: 2018-02-02 15:31    [W:0.107 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site