lkml.org 
[lkml]   [2018]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 1/3] ASoC: stm32: Add S/PDIF to SAI bindings
Date
Add S/PDIF IEC6958 protocol support to STM32 SAI bindings.

Signed-off-by: olivier moysan <olivier.moysan@st.com>
---
Documentation/devicetree/bindings/sound/st,stm32-sai.txt | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
index b1acc1a..f301cdf 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
@@ -45,6 +45,12 @@ SAI subnodes Optional properties:
This property sets SAI sub-block as slave of another SAI sub-block.
Must contain the phandle and index of the sai sub-block providing
the synchronization.
+ - st,iec60958: support S/PDIF IEC6958 protocol for playback
+ IEC60958 protocol is not available for capture.
+ By default, custom protocol is assumed, meaning that protocol is
+ configured according to protocol defined in related DAI link node,
+ such as i2s, left justified, right justified, dsp and pdm protocols.
+ Note: ac97 protocol is not supported by SAI driver

The device node should contain one 'port' child node with one child 'endpoint'
node, according to the bindings defined in Documentation/devicetree/bindings/
--
1.9.1
\
 
 \ /
  Last update: 2018-02-19 16:07    [W:0.088 / U:0.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site