lkml.org 
[lkml]   [2018]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: i2c-designware: sound and s2ram broken on Broadwell-U system since commit ca382f5b38f367b6 (add i2c gpio recovery option)
On Sun, Feb 18, 2018 at 6:32 PM, Dominik Brodowski
<linux@dominikbrodowski.net> wrote:
> On Sun, Feb 18, 2018 at 04:23:41PM +0200, Andy Shevchenko wrote:
>> On Sun, Feb 18, 2018 at 11:41 AM, Dominik Brodowski
>> <linux@dominikbrodowski.net> wrote:
>> > On Sat, Feb 17, 2018 at 10:57:01PM +0200, Andy Shevchenko wrote:
>> >> On Sat, 2018-02-17 at 17:58 +0100, Dominik Brodowski wrote:
>>
>> >> > Do you still need the DEBUG_GPIO output?
>> >>
>> >> It would be nice to have, though if it makes difficulties to you, then
>> >> don't bother.
>> >
>> > Note that I have to enable CONFIG_GPIOLIB before I can enable DEBUG_GPIO;
>> > CONFIG_PINCTRL was off as well. Maybe some "SELECT" is missing for
>> > CONFIG_I2C_DESIGNWARE_BAYTRAIL ?
>>
>> Ah, so, your configuration misses pin control driver. You need to
>> enable it in order to get GPIOs working.
>
> Well, I did not need it in the past to have working sound and working
> suspend to RAM. And it already works if
>
> CONFIG_PINCTRL=y
> CONFIG_DEBUG_PINCTRL=y
>
> CONFIG_GPIOLIB=y
> CONFIG_GPIO_ACPI=y
> CONFIG_DEBUG_GPIO=y
>
> are set (but no PINCTRL or GPIO drivers!).
>
> So I'd suggest to
>
> (a) keep your fixup patch (as things work as previously then),

You may answer to mail with the patch by giving a Tested-by tag.

> (b) to have CONFIG_I2C_DESIGNWARE_BAYTRAIL select the appropriate options from
> above [and CONFIG_XPOWER_PMIC_OPREGION ?] (or depend on it?), or

I don't think there is such dependency.

Jarkko, what do you think?

>> Yes, and with enabled pin control driver.
>
> Well, I've reverted your fixup patch locally and enabled all drivers that I
> could -- including CONFIG_XPOWER_PMIC_OPREGION, CONFIG_MFD_AXP20X, and
> CONFIG_MFD_AXP20X_I2C. But I'm not sure at all that a driver actually became
> active...

-ENOSYS is returned when !GPIOLIB. That what made behaviour different
in the first place.

--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2018-02-19 15:02    [W:0.278 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site