lkml.org 
[lkml]   [2018]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/4] mm/memory_hotplug: enforce block size aligned range check
On Tue 13-02-18 14:31:56, Pavel Tatashin wrote:
> Start qemu with the following arguments:
> -m 64G,slots=2,maxmem=66G -object memory-backend-ram,id=mem1,size=2G
>
> Which: boots machine with 64G, and adds a device mem1 with 2G which can be
> hotplugged later.
>
> Also make sure that config has the following turned on:
> CONFIG_MEMORY_HOTPLUG
> CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE
> CONFIG_ACPI_HOTPLUG_MEMORY
>
> >From qemu monitor hotplug the memory (make sure config has
> (qemu) device_add pc-dimm,id=dimm1,memdev=mem1
>
> The operation will fail with the following trace:
>
> WARNING: CPU: 0 PID: 91 at drivers/base/memory.c:205
> pages_correctly_reserved+0xe6/0x110
> Modules linked in:
> CPU: 0 PID: 91 Comm: systemd-udevd Not tainted 4.16.0-rc1_pt_master #29
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
> BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
> RIP: 0010:pages_correctly_reserved+0xe6/0x110
> RSP: 0018:ffffbe5086b53d98 EFLAGS: 00010246
> RAX: ffff9acb3fff3180 RBX: ffff9acaf7646038 RCX: 0000000000000800
> RDX: ffff9acb3fff3000 RSI: 0000000000000218 RDI: 00000000010c0000
> RBP: 0000000001080000 R08: ffffe81f83000040 R09: 0000000001100000
> R10: ffff9acb3fff6000 R11: 0000000000000246 R12: 0000000000080000
> R13: 0000000000000000 R14: ffffbe5086b53f08 R15: ffff9acaf7506f20
> FS: 00007fd7f20da8c0(0000) GS:ffff9acb3fc00000(0000) knlGS:000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00007fd7f20f2000 CR3: 0000000ff7ac2001 CR4: 00000000001606f0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> Call Trace:
> memory_subsys_online+0x44/0xa0
> device_online+0x51/0x80
> store_mem_state+0x5e/0xe0
> kernfs_fop_write+0xfa/0x170
> __vfs_write+0x2e/0x150
> ? __inode_security_revalidate+0x47/0x60
> ? selinux_file_permission+0xd5/0x130
> ? _cond_resched+0x10/0x20
> vfs_write+0xa8/0x1a0
> ? find_vma+0x54/0x60
> SyS_write+0x4d/0xb0
> do_syscall_64+0x5d/0x110
> entry_SYSCALL_64_after_hwframe+0x21/0x86
> RIP: 0033:0x7fd7f0d3a840
> RSP: 002b:00007fff5db77c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
> RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007fd7f0d3a840
> RDX: 0000000000000006 RSI: 00007fd7f20f2000 RDI: 0000000000000007
> RBP: 00007fd7f20f2000 R08: 000055db265c4ab0 R09: 00007fd7f20da8c0
> R10: 0000000000000006 R11: 0000000000000246 R12: 000055db265c49d0
> R13: 0000000000000006 R14: 000055db265c5510 R15: 000000000000000b
> Code: fe ff ff 07 00 77 24 48 89 f8 48 c1 e8 17 49 8b 14 c2 48 85 d2 74 14
> 40 0f b6 c6 49 81 c0 00 00 20 00 48 c1 e0 04 48 01 d0 75 93 <0f> ff 31 c0
> c3 b8 01 00 00 00 c3 31 d2 48 c7 c7 b0 32 67 a6 31
> ---[ end trace 6203bc4f1a5d30e8 ]---
>
> The problem is detected in: drivers/base/memory.c
> static bool pages_correctly_reserved(unsigned long start_pfn)
> 205 if (WARN_ON_ONCE(!pfn_valid(pfn)))
>
> This function loops through every section in the newly added memory block
> and verifies that the first pfn is valid, meaning section exists, has
> mapping (struct page array), and is online.
>
> The block size on x86 is usually 128M, but when machine is booted with more
> than 64G of memory, the block size is changed to 2G:
> $ cat /sys/devices/system/memory/block_size_bytes
> 80000000
>
> or
> $ dmesg | grep "block size"
> [ 0.086469] x86/mm: Memory block size: 2048MB
>
> During memory hotplug, and hotremove we verify that the range is section
> size aligned, but we actually must verify that it is block size aligned,
> because that is the proper unit for hotplug operations. See:
> Documentation/memory-hotplug.txt
>
> So, when the start_pfn of newly added memory is not block size aligned, we
> can get a memory block that has only part of it with properly populated
> sections.
>
> In our case the start_pfn starts from the last_pfn (end of physical
> memory).
> $ dmesg | grep last_pfn
> [ 0.000000] e820: last_pfn = 0x1040000 max_arch_pfn = 0x400000000
>
> 0x1040000 == 65G, and so is not 2G aligned!
>
> The fix is to enforce that memory that is hotplugged and hotremoved is
> block size aligned.
>
> With this fix, running the above sequence yield to the following result:
> (qemu) device_add pc-dimm,id=dimm1,memdev=mem1
> Block size [0x80000000] unaligned hotplug range: start 0x1040000000,
> size 0x80000000
> acpi PNP0C80:00: add_memory failed
> acpi PNP0C80:00: acpi_memory_enable_device() error
> acpi PNP0C80:00: Enumeration failure


The whole memblock != section_size sucks! It leads to corner cases like
you see. There is no real reason why we shouldn't be able to to online
2G unaligned memory range. Failing for that purpose is just wrong. The
whole thing is just not well thought through and works only for well
configured cases.

Your patch doesn't address the underlying problem. On the other hand, it
is incorrect to check memory section here conceptually because this is
not a hotplug unit as you say so I am OK with the patch regardless. It
deserves a big fat TODO to fix this properly at least. I am not sure why
we insist on the alignment in the first place. All we should care about
is the proper memory section based range. The code is crap and it
assumes pageblock start aligned at some places but there shouldn't be
anything fundamental to change that.

> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>

Acked-by: Michal Hocko <mhocko@suse.com>

> ---
> mm/memory_hotplug.c | 15 ++++++++-------
> 1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index b2bd52ff7605..565048f496f7 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -1083,15 +1083,16 @@ int try_online_node(int nid)
>
> static int check_hotplug_memory_range(u64 start, u64 size)
> {
> - u64 start_pfn = PFN_DOWN(start);
> + unsigned long block_sz = memory_block_size_bytes();
> + u64 block_nr_pages = block_sz >> PAGE_SHIFT;
> u64 nr_pages = size >> PAGE_SHIFT;
> + u64 start_pfn = PFN_DOWN(start);
>
> - /* Memory range must be aligned with section */
> - if ((start_pfn & ~PAGE_SECTION_MASK) ||
> - (nr_pages % PAGES_PER_SECTION) || (!nr_pages)) {
> - pr_err("Section-unaligned hotplug range: start 0x%llx, size 0x%llx\n",
> - (unsigned long long)start,
> - (unsigned long long)size);
> + /* memory range must be block size aligned */
> + if (!nr_pages || !IS_ALIGNED(start_pfn, block_nr_pages) ||
> + !IS_ALIGNED(nr_pages, block_nr_pages)) {
> + pr_err("Block size [%#lx] unaligned hotplug range: start %#llx, size %#llx",
> + block_sz, start, size);
> return -EINVAL;
> }
>
> --
> 2.16.1
>

--
Michal Hocko
SUSE Labs

\
 
 \ /
  Last update: 2018-02-15 12:34    [W:0.133 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site