lkml.org 
[lkml]   [2018]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] PCI: qcom: add missing supplies required for msm8996
From
Date
Hi Srini,

Thanks for the patch!

On 02/14/2018 02:06 PM, srinivas.kandagatla@linaro.org wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>
> This patch adds supplies that are required for msm8996. vdda
> is analog supply that go in to controller, and vddpe_3v3 is
> supply to PCIe endpoint.
>
> Without these supplies PCIe endpoints which require power supplies are
> not enumerated at all, as there is no one to power it up.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> Changes since v1:
> - specify only one vddpe as suggested by Stan
>
> .../devicetree/bindings/pci/qcom,pcie.txt | 4 ++++
> drivers/pci/dwc/pcie-qcom.c | 24 ++++++++++++++++++++--
> 2 files changed, 26 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> index 3c9d321b3d3b..1fd703bd73e0 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> @@ -189,6 +189,10 @@
> Value type: <phandle>
> Definition: A phandle to the analog power supply for IC which generates
> reference clock
> +- vddpe-3v3-supply:

shouldn't it be vddpe_3v3-supply to be aligned with the other supplies?

> + Usage: optional
> + Value type: <phandle>
> + Definition: A phandle to the PCIe endpoint power supply
>
> - phys:
> Usage: required for apq8084
> diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c
> index 3e89909f8cb9..519a2ae416eb 100644
> --- a/drivers/pci/dwc/pcie-qcom.c
> +++ b/drivers/pci/dwc/pcie-qcom.c
> @@ -101,13 +101,14 @@ struct qcom_pcie_resources_1_0_0 {
> struct reset_control *core;
> struct regulator *vdda;
> };
> -

please keep above blank line.

> +#define QCOM_PCIE_2_3_2_MAX_SUPPLY 2
> struct qcom_pcie_resources_2_3_2 {
> struct clk *aux_clk;
> struct clk *master_clk;
> struct clk *slave_clk;
> struct clk *cfg_clk;
> struct clk *pipe_clk;
> + struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY];
> };
>
> struct qcom_pcie_resources_2_4_0 {
> @@ -521,6 +522,14 @@ static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie)
> struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
> struct dw_pcie *pci = pcie->pci;
> struct device *dev = pci->dev;
> + int ret;
> +
> + res->supplies[0].supply = "vdda";
> + res->supplies[1].supply = "vddpe-3v3";
> + ret = devm_regulator_bulk_get(dev, QCOM_PCIE_2_3_2_MAX_SUPPLY,
> + res->supplies);
> + if (ret)
> + return ret;
>
> res->aux_clk = devm_clk_get(dev, "aux");
> if (IS_ERR(res->aux_clk))
> @@ -550,6 +559,8 @@ static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
> clk_disable_unprepare(res->master_clk);
> clk_disable_unprepare(res->cfg_clk);
> clk_disable_unprepare(res->aux_clk);
> +
> + regulator_bulk_disable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies);
> }
>
> static void qcom_pcie_post_deinit_2_3_2(struct qcom_pcie *pcie)
> @@ -567,10 +578,16 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
> u32 val;
> int ret;
>
> + ret = regulator_bulk_enable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies);
> + if (ret < 0) {
> + dev_err(dev, "cannot enable regulators\n");
> + return ret;
> + }
> +
> ret = clk_prepare_enable(res->aux_clk);
> if (ret) {
> dev_err(dev, "cannot prepare/enable aux clock\n");
> - return ret;
> + goto err_aux_clk;
> }
>
> ret = clk_prepare_enable(res->cfg_clk);
> @@ -621,6 +638,9 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
> err_cfg_clk:
> clk_disable_unprepare(res->aux_clk);
>
> +err_aux_clk:
> + regulator_bulk_disable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies);
> +
> return ret;
> }
>
>

--
regards,
Stan

\
 
 \ /
  Last update: 2018-02-14 17:01    [W:0.041 / U:1.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site