lkml.org 
[lkml]   [2018]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 4/9] arm: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource
From
Date


On Tuesday 13 February 2018 07:54 AM, Suman Anna wrote:
> Hi Keerthy,
>
> On 01/09/2018 12:23 AM, J, KEERTHY wrote:
>> Move the dmtimer driver out of plat-omap to clocksource.
>> So that non-omap devices also could use this.
>
> What non-omap devices do you have in mind? I don't think this driver is
> ready for that yet. It still has a lot of OMAP dependencies. So you
> should defer this for later along with the rest of the cleanup and when
> the driver is ready for that.

I mean non-omap TI devices. Not totally generic one.

>
>>
>> No Code changes done to the driver file only renamed to timer-dm.c.
>> Also removed the config dependencies for OMAP_DM_TIMER.
>>
>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
>> Tested-by: Ladislav Michl <ladis@linux-mips.org>
>> ---
>> arch/arm/plat-omap/Kconfig | 6 ------
>> arch/arm/plat-omap/Makefile | 1 -
>> drivers/clocksource/Kconfig | 3 +++
>> drivers/clocksource/Makefile | 1 +
>> arch/arm/plat-omap/dmtimer.c => drivers/clocksource/timer-dm.c | 0
>> 5 files changed, 4 insertions(+), 7 deletions(-)
>> rename arch/arm/plat-omap/dmtimer.c => drivers/clocksource/timer-dm.c (100%)
>>
>> diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
>> index 7276afe..afc1a1d 100644
>> --- a/arch/arm/plat-omap/Kconfig
>> +++ b/arch/arm/plat-omap/Kconfig
>> @@ -106,12 +106,6 @@ config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
>> help
>> PPA routine service ID for setting L2 auxiliary control register.
>>
>> -config OMAP_DM_TIMER
>> - bool "Use dual-mode timer"
>> - depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
>> - help
>> - Select this option if you want to use OMAP Dual-Mode timers.
>> -
>> config OMAP_SERIAL_WAKE
>> bool "Enable wake-up events for serial ports"
>> depends on ARCH_OMAP1 && OMAP_MUX
>> diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
>> index 47e1867..7215ada 100644
>> --- a/arch/arm/plat-omap/Makefile
>> +++ b/arch/arm/plat-omap/Makefile
>> @@ -9,5 +9,4 @@ obj-y := sram.o dma.o counter_32k.o
>>
>> # omap_device support (OMAP2+ only at the moment)
>>
>> -obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
>> obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
>> index c729a88..3f799b2 100644
>> --- a/drivers/clocksource/Kconfig
>> +++ b/drivers/clocksource/Kconfig
>> @@ -21,6 +21,9 @@ config CLKEVT_I8253
>> config I8253_LOCK
>> bool
>>
>> +config OMAP_DM_TIMER
>> + bool
>> +
>> config CLKBLD_I8253
>> def_bool y if CLKSRC_I8253 || CLKEVT_I8253 || I8253_LOCK
>>
>> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
>> index 72711f1..27b5497 100644
>> --- a/drivers/clocksource/Makefile
>> +++ b/drivers/clocksource/Makefile
>> @@ -16,6 +16,7 @@ obj-$(CONFIG_EM_TIMER_STI) += em_sti.o
>> obj-$(CONFIG_CLKBLD_I8253) += i8253.o
>> obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
>> obj-$(CONFIG_DIGICOLOR_TIMER) += timer-digicolor.o
>> +obj-$(CONFIG_OMAP_DM_TIMER) += timer-dm.o
>> obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
>> obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
>> obj-$(CONFIG_FTTMR010_TIMER) += timer-fttmr010.o
>> diff --git a/arch/arm/plat-omap/dmtimer.c b/drivers/clocksource/timer-dm.c
>> similarity index 100%
>> rename from arch/arm/plat-omap/dmtimer.c
>> rename to drivers/clocksource/timer-dm.c
>
> Similar comments as in patch 3 about the file name at the top, and the
> question about adding omap to the file name.

I will go with timer-ti-dm.c following timer-ti-32k.c
Hope that is okay.

>
> Also, I see that omap_dm_timer_get_fclk() is only defined for
> !CONFIG_ARCH_OMAP1, but currently the function is declared in the header
> file for both OMAP1 and OMAP2. You would want to inline that for OMAP1
> in the header file (we currently get away with it because no one uses it).

Sure.

>
> regards
> Suman
>
>> --
>> 1.9.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>

\
 
 \ /
  Last update: 2018-02-14 06:10    [W:0.044 / U:2.856 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site