lkml.org 
[lkml]   [2018]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] ASoC: ak4458: Add bindings for AK4458 DAC
Date
Signed-off-by: Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp>
Signed-off-by: Mihai Serban <mihai.serban@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com>
---
Documentation/devicetree/bindings/sound/ak4458.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/ak4458.txt

diff --git a/Documentation/devicetree/bindings/sound/ak4458.txt b/Documentation/devicetree/bindings/sound/ak4458.txt
new file mode 100644
index 0000000..9bab245
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak4458.txt
@@ -0,0 +1,23 @@
+AK4458 audio DAC
+
+This device supports both I2C and SPI modes.
+
+Required properties:
+
+- compatible : "asahi-kasei,ak4458"
+- reg : The I2C address of the device for I2C, the chip select number for SPI.
+
+Optional properties:
+- reset-gpios: A GPIO specifier for the power down & reset pin
+- mute-gpios: A GPIO specifier for the soft mute pin
+
+Example:
+
+&i2c {
+ ak4458: dac@10 {
+ compatible = "asahi-kasei,ak4458";
+ reg = <0x10>;
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>
+ mute-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>
+ };
+};
--
2.7.4
\
 
 \ /
  Last update: 2018-02-13 17:56    [W:0.045 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site