lkml.org 
[lkml]   [2018]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 03/11] ARM: dts: STi: Add fake reg property for sti-display-subsystem
Date
From: Patrice Chotard <patrice.chotard@st.com>

As sti-display-subsystem sub-nodes (sti-compositor, sti-tvout
sti-hdmi, sti-hda and sti-hqvdp) are SoC's IP, we add a fake
reg property.
This allows to fix the following warning when compiling
dtb with W=1 option:

arch/arm/boot/dts/stih410-b2120.dtb: Warning (unit_address_vs_reg):
Node /soc/sti-display-subsystem/sti-hda@8d02000 has a unit name, but no reg property

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---

v3: _ none
v2: _ add a fake reg property to node without reg property

arch/arm/boot/dts/stih407.dtsi | 4 ++--
arch/arm/boot/dts/stih410-b2120.dts | 2 +-
arch/arm/boot/dts/stih410.dtsi | 3 ++-
3 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 11fdecd9312e..4f01777082f5 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -11,11 +11,11 @@
#include <dt-bindings/gpio/gpio.h>
/ {
soc {
- sti-display-subsystem {
+ sti-display-subsystem@0 {
compatible = "st,sti-display-subsystem";
#address-cells = <1>;
#size-cells = <1>;
-
+ reg = <0 0>;
assigned-clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
<&clk_s_c0_pll1 0>,
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 37a42afa0dd1..23199b1b0991 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -61,7 +61,7 @@
status = "okay";
};

- sti-display-subsystem {
+ sti-display-subsystem@0 {
sti-hda@8d02000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index e4b7e3ddc9ee..d9f964702933 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -102,11 +102,12 @@
status = "disabled";
};

- sti-display-subsystem {
+ sti-display-subsystem@0 {
compatible = "st,sti-display-subsystem";
#address-cells = <1>;
#size-cells = <1>;

+ reg = <0 0>;
assigned-clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
<&clk_s_c0_pll1 0>,
--
1.9.1
\
 
 \ /
  Last update: 2018-02-13 13:58    [W:0.049 / U:0.380 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site