lkml.org 
[lkml]   [2018]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 02/11] ARM: dts: STi: Move leds node outside soc node
Date
From: Patrice Chotard <patrice.chotard@st.com>

Leds are not part of soc, so nove them outside soc node.
This allows to fix the following warnings when compiling
dtb with W=1 option :

arch/arm/boot/dts/stih407-b2120.dtb: Warning (simple_bus_reg):
Node /soc/leds missing or empty reg/ranges property

arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /soc/leds missing or empty reg/ranges property

arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg):
Node /soc/leds missing or empty reg/ranges property

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---

v3: _ none
v2: _ none

arch/arm/boot/dts/stih410-b2260.dts | 49 ++++++++++++++++++------------------
arch/arm/boot/dts/stih418-b2199.dts | 26 +++++++++----------
arch/arm/boot/dts/stihxxx-b2120.dtsi | 26 +++++++++----------
3 files changed, 50 insertions(+), 51 deletions(-)

diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index faafc7b12951..69c2abcaeda8 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -29,36 +29,35 @@
ethernet0 = &ethernet0;
};

- soc {
-
- leds {
- compatible = "gpio-leds";
- user_green_1 {
- label = "User_green_1";
- gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
+ leds {
+ compatible = "gpio-leds";
+ user_green_1 {
+ label = "User_green_1";
+ gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };

- user_green_2 {
- label = "User_green_2";
- gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
+ user_green_2 {
+ label = "User_green_2";
+ gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };

- user_green_3 {
- label = "User_green_3";
- gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
+ user_green_3 {
+ label = "User_green_3";
+ gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };

- user_green_4 {
- label = "User_green_4";
- gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
+ user_green_4 {
+ label = "User_green_4";
+ gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
};
+ };

+ soc {
/* Low speed expansion connector */
uart0: serial@9830000 {
label = "LS-UART0";
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index 5418a0ece659..1ce38ce79952 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -28,24 +28,24 @@
ethernet0 = &ethernet0;
};

+ leds {
+ compatible = "gpio-leds";
+ red {
+ label = "Front Panel LED";
+ gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ green {
+ gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
soc {
sbc_serial0: serial@9530000 {
status = "okay";
};

- leds {
- compatible = "gpio-leds";
- red {
- label = "Front Panel LED";
- gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- green {
- gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
i2c@9842000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 68783e8223b8..1fd3a2b5b938 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -10,24 +10,24 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/c8sectpfe.h>
/ {
+ leds {
+ compatible = "gpio-leds";
+ red {
+ label = "Front Panel LED";
+ gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ green {
+ gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
soc {
sbc_serial0: serial@9530000 {
status = "okay";
};

- leds {
- compatible = "gpio-leds";
- red {
- label = "Front Panel LED";
- gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- green {
- gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
pwm0: pwm@9810000 {
status = "okay";
};
--
1.9.1
\
 
 \ /
  Last update: 2018-02-13 13:57    [W:0.049 / U:0.664 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site