lkml.org 
[lkml]   [2018]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 01/11] ARM: dts: STi: Fix bindings notation
Date
From: Patrice Chotard <patrice.chotard@st.com>

Remove leading 0x and 0s from bindings notation
Add missing unit-address and remove some which are useless.

This allows to fix several warnings like :

Warning (unit_address_vs_reg): Node XXXX has a reg or ranges property, but no unit name
Warning (simple_bus_reg): Node XXXX simple-bus unit address format error, expected "123456"
Warning (unit_address_vs_reg): Node XXXX has a unit name, but no reg property

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
v3: _ Add Reviewed-by
v2: _ none

arch/arm/boot/dts/stih407-b2120.dts | 2 +-
arch/arm/boot/dts/stih407-clock.dtsi | 4 ++--
arch/arm/boot/dts/stih407-family.dtsi | 8 ++++----
arch/arm/boot/dts/stih407-pinctrl.dtsi | 10 +++++-----
arch/arm/boot/dts/stih410-b2120.dts | 2 +-
arch/arm/boot/dts/stih410-b2260.dts | 4 ++--
arch/arm/boot/dts/stih410-clock.dtsi | 4 ++--
arch/arm/boot/dts/stih410-pinctrl.dtsi | 2 +-
arch/arm/boot/dts/stih410.dtsi | 2 +-
arch/arm/boot/dts/stih418-b2199.dts | 4 ++--
arch/arm/boot/dts/stih418-clock.dtsi | 4 ++--
arch/arm/boot/dts/stihxxx-b2120.dtsi | 4 ++--
12 files changed, 25 insertions(+), 25 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts
index c8ad905d0309..cf8bc8a8b947 100644
--- a/arch/arm/boot/dts/stih407-b2120.dts
+++ b/arch/arm/boot/dts/stih407-b2120.dts
@@ -18,7 +18,7 @@
linux,stdout-path = &sbc_serial0;
};

- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index d0a24d9e517a..b882dcf3a649 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -83,7 +83,7 @@
* Bootloader initialized system infrastructure clock for
* serial devices.
*/
- clk_ext2f_a9: clockgen-c0@13 {
+ clk_ext2f_a9: clockgen-c0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
@@ -260,7 +260,7 @@
clock-frequency = <0>;
};

- clockgen-d2@x9106000 {
+ clockgen-d2@9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index cf3756976c39..1608c70f05a9 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -92,7 +92,7 @@
clocks = <&arm_periph_clk>;
};

- l2: cache-controller {
+ l2: cache-controller@8762000 {
compatible = "arm,pl310-cache";
reg = <0x08762000 0x1000>;
arm,data-latency = <3 3 3>;
@@ -389,7 +389,7 @@
reset-names = "global", "port";
};

- miphy28lp_phy: miphy28lp@9b22000 {
+ miphy28lp_phy: miphy28lp {
compatible = "st,miphy28lp-phy";
st,syscfg = <&syscfg_core>;
#address-cells = <1>;
@@ -803,7 +803,7 @@
status = "okay";
};

- st231_gp0: st231-gp0@0 {
+ st231_gp0: st231-gp0 {
compatible = "st,st231-rproc";
memory-region = <&gp0_reserved>;
resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
@@ -816,7 +816,7 @@
mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
};

- st231_delta: st231-delta@0 {
+ st231_delta: st231-delta {
compatible = "st,st231-rproc";
memory-region = <&delta_reserved>;
resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index a29090077fdf..53c6888d1fc0 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -45,7 +45,7 @@
};

soc {
- pin-controller-sbc {
+ pin-controller-sbc@961f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-sbc-pinctrl";
@@ -369,7 +369,7 @@
};
};

- pin-controller-front0 {
+ pin-controller-front0@920f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-front-pinctrl";
@@ -929,7 +929,7 @@
};
};

- pin-controller-front1 {
+ pin-controller-front1@921f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-front-pinctrl";
@@ -962,7 +962,7 @@
};
};

- pin-controller-rear {
+ pin-controller-rear@922f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-rear-pinctrl";
@@ -1157,7 +1157,7 @@
};
};

- pin-controller-flash {
+ pin-controller-flash@923f080 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih407-flash-pinctrl";
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 9830be577433..37a42afa0dd1 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -18,7 +18,7 @@
linux,stdout-path = &sbc_serial0;
};

- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index c663b70c43a7..faafc7b12951 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -19,7 +19,7 @@
linux,stdout-path = &uart1;
};

- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x40000000>;
};
@@ -201,7 +201,7 @@
};
};

- miphy28lp_phy: miphy28lp@9b22000 {
+ miphy28lp_phy: miphy28lp {

phy_port1: port@9b2a000 {
st,osc-force-ext;
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index fde5df17f575..4df1b2187aa2 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -85,7 +85,7 @@
* Bootloader initialized system infrastructure clock for
* serial devices.
*/
- clk_ext2f_a9: clockgen-c0@13 {
+ clk_ext2f_a9: clockgen-c0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
@@ -272,7 +272,7 @@
clock-frequency = <0>;
};

- clockgen-d2@x9106000 {
+ clockgen-d2@9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;

diff --git a/arch/arm/boot/dts/stih410-pinctrl.dtsi b/arch/arm/boot/dts/stih410-pinctrl.dtsi
index b3e9dfc81c07..5ae1fd66c0b8 100644
--- a/arch/arm/boot/dts/stih410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih410-pinctrl.dtsi
@@ -10,7 +10,7 @@
/ {

soc {
- pin-controller-rear {
+ pin-controller-rear@922f080 {

usb0 {
pinctrl_usb0: usb2-0 {
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 68b5ff91d6a7..e4b7e3ddc9ee 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -235,7 +235,7 @@
<&clk_s_d2_quadfs 1>;
};

- sti-hqvdp@9c000000 {
+ sti-hqvdp@9c00000 {
compatible = "st,stih407-hqvdp";
reg = <0x9C00000 0x100000>;
clock-names = "hqvdp", "pix_main";
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index 4e6d915c85ff..5418a0ece659 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -18,7 +18,7 @@
linux,stdout-path = &sbc_serial0;
};

- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x40000000 0xc0000000>;
};
@@ -88,7 +88,7 @@
non-removable;
};

- miphy28lp_phy: miphy28lp@9b22000 {
+ miphy28lp_phy: miphy28lp {

phy_port0: port@9b22000 {
st,osc-rdy;
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index 9a157c1a99b1..e68bf28bd038 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -85,7 +85,7 @@
* Bootloader initialized system infrastructure clock for
* serial devices.
*/
- clk_ext2f_a9: clockgen-c0@13 {
+ clk_ext2f_a9: clockgen-c0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
@@ -265,7 +265,7 @@
clock-frequency = <0>;
};

- clockgen-d2@x9106000 {
+ clockgen-d2@9106000 {
compatible = "st,clkgen-c32";
reg = <0x9106000 0x1000>;

diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 7f80c2c414c8..68783e8223b8 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -80,7 +80,7 @@
st,i2c-min-sda-pulse-width-us = <5>;
};

- miphy28lp_phy: miphy28lp@9b22000 {
+ miphy28lp_phy: miphy28lp {

phy_port0: port@9b22000 {
st,osc-rdy;
@@ -126,7 +126,7 @@
clock-names = "c8sectpfe";

/* tsin0 is TSA on NIMA */
- tsin0: port@0 {
+ tsin0: port {
tsin-num = <0>;
serial-not-parallel;
i2c-bus = <&ssc2>;
--
1.9.1
\
 
 \ /
  Last update: 2018-02-13 13:56    [W:0.103 / U:0.816 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site